
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Jamnagar

Eureka Forbes RO Service Jamnagar always stands whenever you call us for service. You must schedule a Eureka Forbes RO service to experience our satisfactory and low-cost service in Jamnagar. Eureka Forbes RO Service Jamnagar always care for your schedule with the vast service team.
Packages










Your Eureka Forbes RO in Jamnagar is giving trouble right now, and you probably noticed a specific symptom like salty taste, bad smell, slow water, or leakage. In this Jamnagar Eureka Forbes RO service page, the focus is diagnosis first: what the symptom usually means, what our technicians check in order, and what you can do before we arrive. If you call Water Purifier Care India (WPCI), you will get a clear on-site troubleshooting approach for RO, filters, and storage tank issues.
Salty or bitter taste: most often an exhausted RO membrane or low rejection due to scaling on the membrane
Bad smell or brown/black water: usually dirty sediment pre-filter and/or carbon filters; sometimes the storage tank needs cleaning
Slow or weak flow from the tap: commonly clogged pre-filter, low inlet pressure from borewell/municipal line, or a failing booster pump
RO keeps filling but storage tank never gets full: often float valve issue, solenoid valve (SV) problem, or low water pressure causing unstable operation
Water leakage (from bottom or around housing): could be O-ring/housing crack, loose fittings, or a split membrane housing/feed line
Unit makes unusual noise or runs continuously: could be pump/SMPS issue, air in lines, or a control/valve fault that prevents proper shut-off
Quick observation and symptom match: taste/colour complaint, flow rate, whether the RO is producing water or just cycling
Check inlet water condition and pressure: verify if municipal supply/borewell is stable; low pressure can make the RO membrane underperform
Inspect pre-filter and carbon filter housings: look for heavy turbidity, clogging, channeling, and confirm differential pressure if available
Test RO production and storage behaviour: check whether water is reaching the tank properly and whether the system stops at the right time
Check membrane and internal connections: examine membrane housing, seals/O-rings, and fittings for leaks; flush if needed and confirm rejection performance
Clean and sanitize where required: internal tubing and storage tank cleaning if smell/colour returns quickly after filter changes
Jamnagar input water can become harsh during monsoon (more turbidity) and many homes use borewell water that is hard and high TDS. Hard water leads to scaling on the RO membrane, which shows up as salty taste even when filters are changed. If your overhead tank is not clean, smell and colour can come back quickly after service because the RO product water mixes with dirty storage conditions. Also, voltage fluctuation can stress the pump/SMPS and lead to repeated cycling or weak production.
Check whether the problem started after a monsoon/rainy day or after water quality changed
Look at the storage tank level: is it filling normally or staying low even when RO runs
Observe leakage points: under the RO unit, around filter housings, or near inlet/outlet tubing
Note the taste and colour of RO water versus tank water (this helps decide if it is membrane versus storage)
Confirm if inlet water supply is steady (if taps at home are low/irregular, RO will struggle)
If the unit is running continuously, do not keep switching it on and off—record what it is doing and call for diagnosis
Stage / part | Typical replacement interval (depends on water quality and usage) |
|---|---|
Sediment pre-filter | 3-6 months (often earlier in monsoon) |
Pre-carbon / carbon filters | 6-12 months |
RO membrane | 2-3 years (hard/high-TDS areas can reduce this) |
UV lamp (if present) | about 1 year of running time; depends on usage and model |
UF cartridge (if present) | varies by model; often 6-12 months in high turbidity |
The cost mainly depends on what failed stage we find after testing. For example, a clogged pre-filter is a basic service, while a scaled/exhausted RO membrane or a leaking housing with seal replacement is more involved. Work time depends on how many stages need cleaning/replacement and whether parts like SV/float valve/pump require detailed checks. In most cases, it is worth repairing when the issue is limited to filters, minor seals, or correctable flow/pressure faults. If the membrane is exhausted and scaling is severe, technicians may recommend replacement rather than repeated flushes, because repeated cleaning without membrane correction will not stop salty taste and low TDS removal.
Do not open membrane housings if you see active leakage from pressure lines; incorrect assembly can cause bigger leaks
Do not keep running the RO if it is producing salty water; continue cycling can waste water and stress components
Avoid using random chemicals for cleaning carbon/RO internals; wrong products can damage seals or affect performance
Do not bypass safety/control issues (solenoid valve/float switch) to “force” filling
If you tell us your exact symptom (taste, smell, flow speed, leakage point, and whether the tank fills), our WPCI technician can start with the correct checks and reduce trial-and-error. Next step: call for an on-site diagnosis so we can confirm whether it is filters, membrane, UV/UF, tank issues, or a valve/pump fault, and then fix only what is actually causing the problem.
Why Trust Us?
in Jamnagar — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Jamnagar is known as India's brass city, with thousands of small units making brass parts in Shanker Tekri, Dared and other industrial pockets, and it sits next to one of the world's largest refinery complexes. That means a lot of purifiers outside homes: in workshop offices, small factories, shops and staff rooms. Eureka Forbes products, from Aquaguard RO units to the budget AquaSure range, are common in all of these places. The water challenges are much the same as at home, but the usage, dust and wear are far heavier.
Our Eureka Forbes RO service in Jamnagar covers the full company range for households and businesses alike.
Older generations were mostly built to disinfect municipal water. Newer RO models are designed to cut dissolved salts as well, which matters a great deal in Jamnagar.
Municipal supply from dams such as Ranjit Sagar, Sasoi, Aji-3 and Und-1, topped up with Narmada water in dry years, is usually moderate in TDS. Borewell water, which many workshops and older buildings use, is often very salty, and district surveys have recorded fluoride and nitrate problems in some areas. An older Dr. Aquaguard or UV-only AquaSure will make municipal water microbiologically safe but does nothing for salt or fluoride. On borewell water, only an RO model is appropriate.
A purifier in a brass workshop office or a small factory canteen faces things a kitchen unit never does. Metal dust and fine grit settle on the unit and get into vents. Dozens of people draw water daily, so filters reach their litre limits in weeks, not months. Some units are fed from borewells drilled within the industrial plot. And during long shifts in summer, demand peaks exactly when the overhead tank is hottest.
For such sites we suggest servicing by usage rather than by calendar, an external sediment pre-filter for borewell supply, a dust cover over the unit when the floor is being swept, and a larger storage RO rather than a small domestic model. We can set up an AMC with scheduled visits so production staff do not have to track filter dates.
| Product Line | Common Fault in Jamnagar | Usual Remedy |
|---|---|---|
| Aquaguard RO | Salty taste, low flow from scaled membrane | Membrane and filter change, MTDS reset |
| AquaSure RO | Pump failure from heavy use | Pump replacement, pre-filter upgrade |
| AquaSure UV / Dr. Aquaguard | Used on salty borewell water | Advise switch to RO for that source |
| AquaSure gravity | Flow stops | Cartridge at end of life |
| All electric units | Dust-clogged vents, burnt adaptor | Cleaning, SMPS change, surge protection |
A Dr. Aquaguard that has given good service on municipal water for years does not automatically need replacing. If the water it gets has not changed, a new UV lamp and fresh carbon may be all it needs. The case for an upgrade arises when the source shifts to a borewell, when the unit serves far more people than it was built for, or when spare parts are no longer available. In each case we give you the numbers for both paths and let you decide, without any sales pressure.
Homes on municipal water: every six months. Homes on borewell water: every three to four months, with a closer eye on the membrane. Offices and workshops: based on the number of users, often every two to three months. Older UV units should have the lamp replaced every year even if it still glows, because UV output fades well before the lamp goes dark.
Shanker Tekri, Dared, Hapa, Digvijay Plot, Patel Colony, Gulab Nagar, Bedeshwar, Navagam Ghed, Park Colony, Pandit Nehru Marg, Chandi Bazaar, Teen Batti, Kalavad Road, Rameshwar Nagar, Khodiyar Colony, Ranjit Nagar, Sat Rasta, Nagnath Gate, Indira Colony and Saru Section Road.
Water Purifier Care India is an independent multi-brand service provider and not the official or authorised service centre of Eureka Forbes Ltd. Eureka Forbes, Aquaguard, AquaSure and Dr. Aquaguard are trademarks of their owner, used here only to describe the products we service. If your purifier is under manufacturer warranty, consider contacting Eureka Forbes directly.
Call 8506096743 or book through this page for Eureka Forbes RO service in Jamnagar.