
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Udaipur

Eureka Forbes RO Service Udaipur always stands whenever you call us for service. You must schedule a Eureka Forbes RO service to experience our satisfactory and low-cost service in Udaipur. Eureka Forbes RO Service Udaipur always care for your schedule with the vast service team.
Packages










If your Eureka Forbes RO is troubling you in Udaipur right now, it is usually showing a clear symptom: bad taste, salty water, slow flow, strange noise, leakage, or the purifier not filling. This page is for that exact moment, when you want the right diagnosis first and then the correct service. A technician from Water Purifier Care India (WPCI) typically checks the most common failure points in a fixed order, because the same symptom can come from different parts.
Bad or salty taste / water tastes like it is not RO: technician checks RO membrane health, then verifies TDS rejection using a TDS meter, and inspects whether post-carbon filter is exhausted.
Slow water flow or low output: technician checks sediment pre-filter choking, checks inlet pressure (municipal vs borewell), and looks for clogged membrane or a weak booster pump.
Water smells bad or tastes flat: technician inspects pre-carbon and post-carbon filters for saturation, checks for bacterial growth risk points, and confirms the internal sanitization needs.
Noise during operation (bubbling, humming, rattling): technician checks air in lines, checks booster pump and SMPS, and verifies whether a solenoid valve (SV) is sticking or repeatedly cycling.
Leakage from under the purifier / around housings: technician checks O-rings, housing cracks, loose clamps, and drain line connections; then checks if leakage is coming from filter housings or from the RO membrane compartment.
Purifier not filling / keeps restarting: technician checks float valve and inlet water availability, checks solenoid valve (SV) opening, and verifies power stability and wiring/transformer health.
Quick checks first: technician tests inlet water quality basics (hardness/high TDS signs), checks water pressure, and listens to pump/SV cycling pattern.
TDS and flow verification: technician measures output quality with a TDS meter (before/after stages where applicable) and checks whether flow matches normal operation.
Filter and housing inspection: technician removes and inspects sediment pre-filter, pre-carbon, and post-carbon conditions, checks housings for leakage, and replaces only the needed elements.
RO membrane and pressure side checks: technician checks membrane performance and connection integrity; if scaling is suspected (common in Udaipur hard water), they clean as per condition.
Sanitization and reassembly: technician flushes the system, performs internal cleaning/sanitization where required, and ensures correct line routing (inlet, permeate, reject, drain).
Final test: technician runs the purifier for a short period, re-checks output taste/flow, and confirms there is no active leakage or abnormal noise.
In Udaipur, many homes use borewell or store water in overhead tanks, so the inlet can carry more sediment and higher TDS. That is why sediment pre-filters choke faster, and carbon stages get exhausted when they cannot control odour and chlorine-like compounds. When pre-filters are delayed, the RO membrane also gets stressed, leading to reduced TDS rejection and eventually salty taste. If you ignore slow flow for too long, the membrane can scale internally, and cleaning may not fully restore performance.
Sediment pre-filter | 3-6 months |
Pre-carbon filter | 6-12 months |
Post-carbon filter | 6-12 months |
RO membrane (depends on input TDS and usage) | 2-3 years (often less with very high TDS) |
UV lamp (if present) | around 1 year of running time |
UF cartridge (if present) | typically 6-12 months depending on water quality |
These are typical timelines, not a guarantee. If your purifier sees very high TDS, frequent monsoon turbidity, or delayed filter changes, intervals can reduce. A technician should decide replacement based on TDS/flow observations, not only on the calendar.
The service cost mainly depends on which stage is actually failing. A simple filter change is different from membrane cleaning/replacement, and electrical issues (SMPS, pump, float valve, solenoid valve) change the work scope. Time also varies: if the issue is a choked pre-filter, the job is quicker; if the membrane is scaling or there is a leakage from housings and O-rings, the technician needs more time for inspection and correct reassembly. Whether the purifier is worth repairing usually depends on membrane condition, frequency of recurring problems, and how much scaling or leakage is present. If the membrane has lost rejection performance, repeated filter changes may not fix the salty taste—then membrane service becomes the real solution.
Check if the issue is only with RO output, or also affects stored water from the tank/overhead tank.
Note when the problem started: after monsoon, after a power cut, after a long gap in usage, or after filter change.
Look for visible leakage: near filter housings, under the RO unit, or from the drain line.
If flow is slow, confirm inlet water is coming steadily (especially with borewell or overhead tank).
If you have a TDS meter, note the approximate RO output TDS; if not, at least tell the technician whether the taste became salty/weak recently.
If you share these details, Water Purifier Care India (WPCI) technicians can narrow down whether it is filters, membrane, UV/UF (if present), or inlet/electrical parts. Avoid opening RO housings without experience, because wrong reassembly can cause bypassing or new leaks. The sensible next step is to call for an on-site diagnosis when the symptom first appears, so the membrane does not get damaged by delays.
Why Trust Us?
in Udaipur — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Udaipur's housing ranges from centuries-old havelis in the walled city to apartments and independent houses in the planned sectors of Hiran Magri and the colonies stretching along the main roads. Eureka Forbes purifiers are found in all of them, and they span several decades of the company's products. An old haveli may still have a UV Aquaguard fitted years ago, while a new flat has a feature-packed RO. Servicing the whole Eureka Forbes family properly means understanding both the machine and the building it sits in.
In the lanes around Jagdish Chowk, Chandpole, Hathipole and Ghanta Ghar, many buildings still have old galvanised iron pipes and rooftop tanks that have been in place for a long time. Aged GI pipes corrode from the inside, and rust flakes travel with the water. We regularly find sediment filters in these homes stained orange within weeks. That rust also coats UV sleeves, reducing their effectiveness. In older parts of Udaipur, a Eureka Forbes service is as much about dealing with what the plumbing adds as what the source contains.
PHED's supply blends lake water from Pichola and Fateh Sagar with water from the Mansi Wakal dam scheme and Jaisamand. This is surface water with moderate dissolved salts, well suited to UV or a lightly set RO. Groundwater is another matter: the hard-rock aquifers around Udaipur yield moderately to very hard water, and nitrate exceeds the limit in parts of Girwa block according to Central Ground Water Board surveys. An older UV-only Eureka Forbes unit cannot handle that. Homes that have added a borewell need an RO model.
| Feature | Older Eureka Forbes Units | Current Models |
|---|---|---|
| Purification | UV, or basic RO | RO, UV and UF with copper or mineral stages |
| Monitoring | Indicator lamps | Digital filter-life and service alerts |
| Parts supply | Some items need compatible substitutes | Widely available |
| Common faults | Lamp holders, brittle tubes, chokes | Sensors, control boards, cartridge locks |
| Fit for hard well water | UV-only types: no | RO types: yes |
If your older Eureka Forbes RO has a sound body and pump, a membrane and filter change can restore it for a fraction of the price of a new one. If it is a UV-only unit now fed by borewell water, no repair will make it suitable. And in walled-city homes with rusty pipes, sometimes the most useful advice is about the plumbing rather than the purifier. We explain all of this before you spend anything.
Newer flats in the sectors bring their own issues. Many have purifiers installed by the builder or plumber in cramped spots under a cabinet or right beside the hob, where heat and steam shorten the life of electronics. Others share a building sump with water from several sources. If your purifier sits somewhere awkward, we can suggest a better position during the visit and relocate it if you wish. For AquaSure gravity units used as a backup during supply cuts, the same rule applies as anywhere: fill them with PHED water, not borewell water, because they do not lower hardness or nitrate.
Newer RO models on PHED water: every six months. Any unit on borewell water, or in a building with old GI pipes: every three to four months. UV lamps on legacy units: test at least yearly, because they weaken while still glowing.
Jagdish Chowk, Chandpole, Hathipole, Ghanta Ghar, Surajpole, Udaipole, Ambamata, Fatehpura, Sardarpura, Shobhagpura, Hiran Magri, Sector 6, Sector 9, Pratap Nagar, Goverdhan Vilas, Bhuwana, Panchwati and neighbouring areas.
Water Purifier Care India is an independent multi-brand service provider. We are not Eureka Forbes Ltd and not its authorised service centre. Eureka Forbes, Aquaguard and AquaSure are trademarks of their owner, used here only to describe the products we service. If your purifier is under manufacturer warranty, you may wish to contact Eureka Forbes.
Call 8506096743 or book online through this page for Eureka Forbes RO service in Udaipur.