
Select Service
Choose your package










If your Kent RO purifier in Bhuj is giving bad taste, bad smell, salty water, weak/slow flow, unusual noise, or it is leaking, you are not alone. These symptoms usually come from a few predictable faults in the pre-filters, carbon stages, RO membrane, UV/UF part, pump/SMPS, or from low inlet pressure common during dry months and after overhead-tank storage. Water Purifier Care India (WPCI) typically diagnoses these issues in a fixed order so the right part gets corrected, not just cleaned.
Salty or metallic taste: most often RO membrane is exhausted, or there is a bypass/leak internally in the membrane housing
Bad smell (like chlorine/rotten smell) with normal flow: usually carbon filter is finished or UV/UF is not functioning properly
Slow filling or weak water output: clogged sediment pre-filter, low inlet pressure, or a failing booster pump/solenoid valve (SV)
Continuous running / not stopping: float valve issue, pressure switch fault, or control problem after storage tank pressure changes
Water leakage (under machine or from tubing/joints): loose fittings, housing crack, O-rings worn out, or drain line blockage causing back pressure
Strange noise while water is being processed: pump cavitation due to low pressure, air in line, or a worn impeller/strainer issue
Confirm the symptom and when it started: after monsoon turbidity, after a power cut, after tank refilling, or after long non-use
Check inlet water pressure and flow from your tap/overhead tank: low inlet pressure is a common reason for slow output and pump noise
Inspect and test the TDS reading (if you have a TDS meter) and compare source vs RO outlet: this quickly indicates membrane performance
Check pre-filters and carbon stages condition: sediment filter clogging reduces flow; carbon exhaustion affects taste and smell
Inspect RO membrane housing, fittings, and drain line for leaks/flush behavior: leaks can cause salty rejection water to mix back
Test electrical parts if required: pump current/SMPS, UV lamp status, and confirm float valve/solenoid valve operation
Bhuj water quality can be hard and high in dissolved solids, especially when water is stored in overhead tanks and then drawn for RO use. That accelerates scaling on the RO membrane and clogs the sediment stage faster. Typical intervals below are a practical guide, but your actual timing depends on your inlet TDS, usage hours, and how often the system is flushed.
Stage / part | Typical interval (varies by input water) |
|---|---|
Sediment pre-filter | Every 3-6 months (faster during monsoon) |
Pre-carbon and post-carbon filters | Every 6-12 months |
RO membrane | Usually 2-3 years |
UV lamp (if present) | About 9-12 months of running time |
UF cartridge (if used) | Usually 12-18 months depending on model and turbidity |
Note the exact problem: taste, smell, flow, leakage, noise, or shut-off issue. This helps the technician reach the root cause faster
Check if the inlet tap/overhead tank is supplying properly. RO often suffers when inlet pressure drops
Look for visible leaks near tubing joints, drain outlet, and under the housing. If water is pooling, turn off the RO and do not run it
If your RO has a TDS display, note source TDS and RO output TDS separately (even one reading helps)
If the machine is continuously running, check whether the storage tank/float area is stuck due to water level changes
In a Kent RO service in Bhuj, cost depends mainly on which stage is failing (filters only vs membrane vs pump/SMPS vs UV/UF), how much internal cleaning is needed for scaling, and whether there is leakage that requires housing/O-ring replacement. The technician also considers whether the problem is repeat failure after a recent part change (which can point to low inlet pressure, incorrect installation, or bypass). Repair is usually worth it when the RO membrane can still be recovered by proper flushing and when only the clogged pre-filter/carbon stages are exhausted. If the membrane is confirmed exhausted and inlet water is very high TDS, replacement becomes the sensible fix to stop salty output and repeated complaints.
If you tell WPCI (or any service technician) your exact symptom and when it started, they will typically follow the same diagnosis order: inlet pressure first, then filters/carbon, then TDS and membrane performance, then UV/UF and electrical controls. Next step: stop running the RO if there is active leakage or continuous running, and call for service so the right component is corrected before the problem spreads.
in Bhuj — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Find answers to common questions about our services
Are you looking for reliable and efficient kent ro services in Bhuj? Look no further! We offer best Kent RO Service in Bhuj and are committed to providing top-notch service for all your Kent RO water purifier needs. With a dedicated team of professionals and a strong presence in Bhuj, we ensure that your Kent RO system functions optimally, delivering clean and pure drinking water for you and your family.
| Kent RO Service Type | Contact Number |
| Kent RO Repair Service Bhuj | 8506096743 |
| Kent RO Service Charges in Bhuj | 8506096743 |
| Kent RO Service in Bhuj | 8506096743 |
| Kent Service Center Near Me in Bhuj | 8506096743 |
| Kent RO Water Purifier Service in Bhuj | 8506096743 |
Finding a Kent RO service center near me in Bhuj is now easier than ever. Our online platform allows you to locate the nearest Kent service center in Bhuj effortlessly. Simply enter your location details, and you will be presented with a list of Kent service centers close to your area. Our customer support team is also available round the clock to assist you with any queries or scheduling service appointments.
At Kent RO Service, we believe in delivering unparalleled service to our customers in Bhuj. With our dedicated team, genuine spare parts, convenient service centers, and affordable packages, we ensure that your Kent RO system functions optimally, providing you and your loved ones with safe and pure drinking water.
Ensuring the longevity and efficiency of your Kent water purifier is crucial for consistent water quality. Regular maintenance and timely filter replacements play a significant role in achieving this. With Kent RO Service in Bhuj, you can rest assured that your water purifier will receive the care it deserves.
| Service type | Charges |
| Kent RO Installation | Start from Rs.499/ |
| Kent RO Uninstallation | Start from Rs. 399/- |
| Kent RO Basic Service/Repair | Start from Rs. 399/- |
| Kent RO AMC Plans | Start from Rs. 999/- |
Skilled technicians at Kent service centers in Bhuj are well-versed in handling all models and variants of Kent water purifiers. They undergo rigorous training to stay updated with the latest advancements in water purification technology. When you schedule a service with us, you can expect professional and reliable assistance.
During a Kent RO service near me in Bhuj, our technicians thoroughly inspect your water purifier for any potential issues or signs of wear and tear. They clean the filters, sanitize the storage tank, and ensure the optimal functioning of various components. If any part needs replacement, they use genuine Kent spare parts to maintain the performance and longevity of your purifier in Bhuj.
| 1. Book Kent Service by Call us/Fill the details in the inquiry form. |
| 2. Get Technician Confirmation and schedule your service. |
| 3. Technician will Visit your place & Complete the Work |
| 4. Make Payment and Share your valuable feedback. |
Contact us today to schedule a Kent RO service appointment in Bhuj. Experience the difference of professional service and let us take care of all your water purifier needs. Your satisfaction is our top priority!