
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Lunglei

Livpure Service Center Lunglei always stands whenever you call for service. You must schedule a Livpure Service to experience it's satisfactory and low-cost service in Lunglei. Livpure RO Service Lunglei always care for your schedule with the vast service team.
Packages










If your Livpure RO is showing trouble in Lunglei, you are not alone. Many issues start as small changes like bad taste, bad smell, low water flow, or the RO making unusual sounds, and then they worsen if the filters and membrane are left too long. Water Purifier Care India (WPCI) technicians usually begin by matching your symptoms to the RO stage that is failing, then they check pressure, flow, and leakage before touching parts.
Bad taste (especially salty/bitter) or high TDS on a TDS meter: usually points to RO membrane exhaustion or membrane not rejecting properly. Technician checks feed/RO rejection readings, checks post-carbon output, and inspects the membrane housing connections.
Bad smell or musty taste: commonly related to carbon filter saturation or poor sanitization. Technician checks pre-carbon/post-carbon stages, flow direction, and whether the system was recently cleaned.
Slow water flow / weak output: often due to choked sediment pre-filter, low inlet pressure, or a failing booster pump. Technician checks inlet pressure, measures flow, and verifies the pre-filter condition.
RO keeps running but storage tank does not fill properly: can be float/level issue, solenoid valve (SV) problem, or drain-line restriction. Technician checks float valve operation, SV switching, and confirms tank inlet and drain paths are clear.
Water leakage from housing, tubing, or under the unit: typically a loose fitting, cracked RO housing, worn O-rings, or pressure-related seepage. Technician checks all connection points, runs a controlled water test, and inspects O-rings and housings.
No water / RO not starting: usually electrical or water-supply related (power fluctuations, SMPS issue, motor start problem, or inlet valve/solenoid not opening). Technician checks power stability, checks solenoid valve actuation, and confirms inlet water is reaching the system.
Customer complaint check: we confirm the exact symptom (taste/smell/TDS/flow/leakage) and when it started, based on your usage and water source (borewell or municipal).
Basic water and pressure checks: technician verifies inlet pressure and flow, then checks whether the RO is receiving proper feed water (this matters a lot in Lunglei where inlet quality can change with supply and monsoon).
Stage inspection: pre-filter, carbon filters, RO membrane, and UV/UF module (if present) are checked for clogging, saturation, and correct flow path.
Electrical and control checks: pump start, SMPS behaviour, solenoid valve (SV) operation, and float/level control are verified if the unit is not producing or not stopping correctly.
Sanitization and reassembly test: after cleaning, we run the RO to stabilize output, then re-check for leaks and ensure connections and O-rings are seated properly.
A correct diagnosis decides what needs maintenance. Normal service usually includes cleaning and checking, but replacement depends on filter clogging, carbon exhaustion, membrane performance, UV lamp life, and whether there is actual leakage from a housing or fittings. If the issue is caused by low inlet pressure or a control problem like the float valve, changing only filters will not solve it.
Pre-filter (sediment) cleaning/replacement: done when flow is low or the filter is heavily loaded with silt.
Pre-carbon/post-carbon filter service: done when taste and smell issues show up or after long usage; not every issue needs carbon replacement.
RO membrane inspection and possible replacement: considered when TDS remains high or salty/bitter rejection is poor.
UV lamp (if your model has UV): checked for running time and output; UV is usually not the main cause of salty water, but it matters when bacterial concern is suspected.
Solenoid valve (SV) and float valve checks: done when the tank fills incorrectly, the RO keeps cycling, or stops early.
Leak test and O-ring/housing correction: done only when there is actual leakage; it is not assumed from the symptom alone.
Stage | Typical service interval (rough guideline) |
|---|---|
Sediment pre-filter | Every 3-6 months (faster in monsoon or very turbid input) |
Carbon filters (pre/post) | Every 6-12 months |
RO membrane | Usually 2-3 years (depends on inlet TDS and how long filters stay clogged) |
UV lamp (if present) | Around 1 year of running time |
Overall sanitization + internal check | At least once a year, or earlier if smell/taste returns |
In a Livpure RO, the cost is mainly decided by what the diagnosis finds: whether it is only filter maintenance, or a membrane/pump/control part replacement. Time also depends on access and the type of issue. For example, a clogged pre-filter service is quicker, while a membrane swap or leak fix needs more time for proper fitment, testing, and stabilization. Repair is usually worth it when the RO is structurally fine and only one stage is failing; if multiple stages are exhausted at the same time, the technician will tell you the practical option after checking performance and output TDS.
Check your input water source: is it borewell or municipal, and did the problem start after monsoon or a supply change?
If possible, measure TDS of feed and RO output using your TDS meter. Note the numbers (even approximate) to help the technician confirm membrane rejection.
Look for visible leaks: around the RO housing, near tubing joints, and under the unit. Wipe dry and see if it re-wets within 10-15 minutes.
Observe the flow pattern: does the RO start normally and then stop, or does it never build pressure?
Note any unusual sound: continuous running, clicking, buzzing, or grinding suggests a pump/control issue rather than just filters.
If you share the symptom (taste/smell/slow flow/leakage), the approximate start time, and your input type (borewell or municipal), WPCI technicians in Lunglei can narrow down the failing stage faster. Next sensible step is to book a diagnosis visit instead of changing parts randomly, because the right fix depends on which stage is actually failing.
Why Trust Us?
in Lunglei — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
There are various Livpure Service Center in Lunglei. Thus you can easily book your water purifier services in Lunglei. At the Livpure Service Center in Lunglei, you will receive all kinds of water purifier services like maintenance service, Livpure water purifier repair services and various others. It is said to be an electrical device; a Livpure water purifier demands regular service. Lungleis people can drink contamination free water all the time they need to drink water. And the Livpure Service Center in Lunglei helps them to get the best solution for this.
But Livpure water purifier is also a complex device that needs an expert hand for servicing; thus, the Livpure RO Service Center's role in Lunglei has become crucial. At Livpure RO Service Center in Lunglei, all the water purifier service engineers are expert and fully trained who believe in providing the best and mind-blowing services inside Lunglei. Most of the people in Lunglei avoid Livpure water purifier services due to the high service cost. Still, at the Livpure Service Centre, you will get all kinds of water purifier services at the best and affordable price. Thus hiring a service engineer at the Livpure Service Center can be an option for Lungleis people.
| Livpure RO Service Type | Contact Number |
| Livpure Repair Service Lunglei | 8506096743 |
| Livpure RO Installation in Lunglei | 8506096743 |
| Livpure RO AMC in Lunglei | 8506096743 |
If you are searching for the Livpure service center in Lunglei, you can search for the Livpure Service Center Near Me in Lunglei on Google. But when you make this search on Google, the search engine collects all the Livpure service center in Lunglei near your location and display on your device. But for a better result must ensure that your mobile location is enabled. Booking Livpure water purifier service from your nearest location in Lunglei ensures that you will get your water purifier service done quickly. However, Lungleis Livpure Service Center promises that they will resolve your water purifier issues within 24 hours. Thus the search for the Livpure Service Centre Near Me in Lunglei, book your water purifier services and enjoy hassle free water purifier service at your doorstep anywhere in Lunglei.
| Service type | Charges |
| Installation | Start from Rs.499/ |
| Uninstallation | Start from Rs. 399/- |
| Basic Service/Repair | Start from Rs. 399/- |
| AMC | Start from Rs. 999/- |
Livpure water purifier filters get muddy due to continuous removal of the water pollutant present in the water because Lungleis water quality is inferior. When the water purifier filters get dirty, the drinking water purifier suffers, which can be harmful to Lungleis people. Thus it is recommended to book Livpure water purifier services at Livpure Service Center in Lunglei. Livpure water purifier demands regular services and demand for the expert, and in Lunglei, not all water purifier service providers are trusted except the Livpure Service Centre.
Lunglei people can also book their Livpure water purifier service without visiting the Livpure Service Center in Lunglei. Yes, now with the advancement in technology has made this possible, now you can easily book your water purifier service from anywhere in Lunglei by calling at Livpure Service Centre. The service center executive at Livpure Service Center in Lunglei is friendly, helping you with all kinds of water purifier service related queries.
| 1. Book Livpure Service in Lunglei by Call us/Fill the details in the enquiry form. |
| 2. Get Technician Confirmation and schedule your service for your Pureit water purifier in . |
| 3. Technician will Visit at your place & Complete Work |
| 4. Make Payment and Share your valuable feedback to Pureit service center. |