
Select Service
Choose your package










If your RO in Bissau is giving bad taste, dirty water, slow flow, unusual noise, or leaks, you do not need guesswork. WPCI RO service in Bissau usually starts with symptoms, then moves to the exact stage that is failing. A technician checks in a fixed order so you do not end up paying for parts that were never the problem.
Bad taste or salty taste: often the RO membrane is exhausted or the TDS is high due to scaling
Water smells odd or looks dirty even after RO: usually the pre-filters/carbon filter are choked or bypassing
Slow water flow / filling very slowly: sediment clogging, low inlet pressure, or a weak booster pump
No water / water stops suddenly: intake issue, float/level control fault, or solenoid valve (SV) not opening
Water leaking from sides or under the housing: loose fittings, cracks in RO housing/bulkhead, or membrane housing seal failure
RO keeps running continuously: usually float valve/level switch issue or drain/pressure problem causing wrong shut-off
Check inlet water pressure and flow (municipal vs borewell behaviour, monsoon turbidity, pressure drops)
Inspect pre-filter and sediment filter condition; confirm whether carbon stage is still absorbing
Measure output quality using a TDS meter (inlet vs reject vs product) to identify membrane vs filter issues
Test membrane performance by checking rejection trend and flushing condition (scaling/dirty membrane is common in hard-water areas)
Check electrical parts: SMPS, wiring, and whether the pump is drawing correct current; inspect UV/UF only if your model has it
Check valves and controls: solenoid valve (SV), float valve/level sensor, and check for continuous running or wrong shut-off
During RO service, the technician normally cleans the stages that are meant to be maintained (pre-filter housing cleaning, carbon and sediment checks, internal flush). If the RO is giving salty or high-TDS output, the membrane is tested for rejection; if it is worn out, it is replaced. UV lamp checks are done only for models that include UV; a UV lamp does not fix bad RO rejection, it only handles disinfection after water purification.
RO stage | Typical replacement/service interval (rough guide) |
|---|---|
Sediment pre-filter | 3-6 months (earlier during monsoon or high turbidity) |
Pre-carbon / carbon filter | 6-12 months (depends on smell/taste and inlet quality) |
RO membrane | Usually 2-3 years (faster with very hard/high TDS water and poor flushing) |
UV lamp (if present) | About 12 months of running time |
Cost depends on which stage failed: filters and cleaning are simpler than membrane replacement or pump/SMPS repairs
If the unit has leakage, technician time increases because they must locate the exact seal/fitting and pressure-test it
Time depends on part availability and whether the technician needs to flush/descale the system fully
If output TDS is high and rejection is poor, membrane replacement is usually the sensible fix rather than repeated filter-only service
If the unit is electrically failing (no run, repeated stops), repair of pump/SMPS/SV is often required before further filter work
Check if inlet water is coming properly (especially during borewell fluctuations or after a power cut)
Observe storage tank level: if water is not available to the RO inlet, the RO will act unstable
Look for obvious leaks at pipe joints and under the housing; stop using if leaking is active
If flow is slow, check whether any tap/line is blocked and whether the RO drain line is kinked
Note symptoms: taste change, smell, color, slow filling, continuous running, or total stop; share this with the technician
If you tell WPCI or any RO service center in Bissau your exact symptom (slow flow, salty taste, dirty output, leakage, or continuous running), the diagnosis becomes faster. The sensible next step is to stop guessing, note the issue, and request a symptom-based RO inspection so the right stage is repaired the first time.
in Bissau — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Find answers to common questions about our services
Are you looking for reliable and efficient ro services in Bissau? Look no further! We offer best RO Service in Bissau and are committed to providing top-notch service for all your RO water purifier needs. With a dedicated team of professionals and a strong presence in Bissau, we ensure that your RO system functions optimally, delivering clean and pure drinking water for you and your family.
| RO Service Type | Contact Number |
| RO Repair Service Bissau | 8506096743 |
| RO Service Charges in Bissau | 8506096743 |
| RO Service in Bissau | 8506096743 |
| Service Center Near Me in Bissau | 8506096743 |
| RO Water Purifier Service in Bissau | 8506096743 |
Finding a RO service center near me in Bissau is now easier than ever. Our online platform allows you to locate the nearest service center in Bissau effortlessly. Simply enter your location details, and you will be presented with a list of service centers close to your area. Our customer support team is also available round the clock to assist you with any queries or scheduling service appointments.
At RO Service, we believe in delivering unparalleled service to our customers in Bissau. With our dedicated team, genuine spare parts, convenient service centers, and affordable packages, we ensure that your RO system functions optimally, providing you and your loved ones with safe and pure drinking water.
Ensuring the longevity and efficiency of your water purifier is crucial for consistent water quality. Regular maintenance and timely filter replacements play a significant role in achieving this. With RO Service in Bissau, you can rest assured that your water purifier will receive the care it deserves.
| Service type | Charges |
| RO Installation | Start from Rs.499/ |
| RO Uninstallation | Start from Rs. 399/- |
| RO Basic Service/Repair | Start from Rs. 399/- |
| RO AMC Plans | Start from Rs. 999/- |
Skilled technicians at service centers in Bissau are well-versed in handling all models and variants of water purifiers. They undergo rigorous training to stay updated with the latest advancements in water purification technology. When you schedule a service with us, you can expect professional and reliable assistance.
During a RO service near me in Bissau, our technicians thoroughly inspect your water purifier for any potential issues or signs of wear and tear. They clean the filters, sanitize the storage tank, and ensure the optimal functioning of various components. If any part needs replacement, they use genuine spare parts to maintain the performance and longevity of your purifier in Bissau.
| 1. Book Service by Call us/Fill the details in the inquiry form. |
| 2. Get Technician Confirmation and schedule your service. |
| 3. Technician will Visit your place & Complete the Work |
| 4. Make Payment and Share your valuable feedback. |
Contact us today to schedule a RO service appointment in Bissau. Experience the difference of professional service and let us take care of all your water purifier needs. Your satisfaction is our top priority!