
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Siliguri

RO Service Siliguri always stands whenever you call us for service. You must schedule a RO service to experience our satisfactory and low-cost service in Siliguri. RO Service Siliguri always care for your schedule with the vast service team.
Packages










If your RO purifier in Siliguri is giving bad taste, bad smell, slow water flow, frequent shut-off, or even leakage, it is usually not a “random fault”. RO problems follow a pattern: the symptom you notice tells us which stage is failing (pre-filter, carbon, RO membrane, UV/UF, tank, pump, or valves). A service technician from Water Purifier Care India (WPCI) typically starts with symptoms first, then checks the parts in a fixed order to avoid repeated hit-and-trial.
Bad taste or salty taste from RO outlet: usually RO membrane life is over, or there is bypass/leakage inside the membrane housing.
Bad smell (especially after storage in tank): often carbon filter exhausted, or bacterial growth risk due to stagnant water; technician also checks UV/UF function if installed.
Slow flow from the RO tap: commonly sediment pre-filter choked due to monsoon turbidity, or low inlet pressure/weak booster pump.
Water keeps filling then stops (auto shut-off issues): usually float valve malfunction, tank level sensor/float mis-set, or solenoid valve (SV) not opening/closing correctly.
Frequent noise, vibration, or pump running continuously: often booster pump problem, dry-running due to low inlet, clogged lines, or pressure switch faults.
Leakage from RO housing or under the purifier: can be damaged O-rings, loose fittings, cracked membrane housing, or a failing drain/connection line.
Quick water quality check: inlet pressure, inlet TDS (if available), and whether the problem is only at RO output or also at raw/municipal/borewell inlet.
Physical inspection: housing leaks, tubing connections, drain line flow, and whether filters are seated correctly.
Filter stage check: sediment pre-filter loading and carbon filter performance (bad smell/taste points here).
RO membrane stage check: reject/production ratio, membrane pressure behavior, and whether the membrane is scaling (hard water areas around Siliguri often scale faster).
Auto shut-off and tank control: float valve/tank level function and, if present, UV/UF operation and related electrical checks.
Final run test: after any part change, unit is flushed and tested for stable output and correct shut-off behavior.
In Siliguri, supply quality can swing with monsoon. When turbidity rises, the sediment pre-filter clogs faster and RO flow becomes slow within days. Hard water also increases scaling on the RO membrane, which leads to salty taste, higher TDS at the RO outlet, and faster membrane exhaustion. Voltage fluctuation can affect SMPS and control circuits, causing repeated shut-down or pump issues. If the purifier is connected to an overhead tank, storage stagnation can also worsen smell unless the maintenance schedule is followed.
Check whether the issue is new or after filter change: if it started right after a cartridge replacement, the cause can be wrong seating or incorrect flow direction.
Observe flow rate: if raw water is fine but RO output is weak, the fault is usually in sediment/carbon stages, low inlet pressure, or membrane performance.
Look for visible leaks: wetness around the membrane housing, filter caps, or drain line is not safe to ignore.
Check tank filling: if storage tank is not filling properly, float valve or solenoid operation is likely.
Note noise pattern: constant pump running usually means pressure control/auto shut-off is not working.
If you have a TDS meter, compare inlet vs RO outlet TDS. A big jump at RO output typically means membrane stage failure.
Stage/part | Typical interval (not guaranteed) | When it needs earlier attention |
|---|---|---|
Sediment pre-filter | 3-6 months | After monsoon, if flow becomes slow or pressure drops |
Pre-carbon filter | 6-12 months | If taste is dull or smell starts coming from RO water |
RO membrane | 2-3 years | If outlet starts tasting salty or TDS rises quickly |
UV lamp (if installed) | ~1 year of running time | If output quality drops despite fresh filters |
Post-carbon filter (if installed) | 6-12 months | If smell returns after some time in storage |
RO service cost and time depend on what the diagnosis shows. If it is only pre-filter/carbon replacement due to turbidity, the job is quicker. If the fault is in RO membrane, booster pump, SMPS, solenoid valve, float control, or there is leakage from housing, more troubleshooting and parts may be needed. Typical service time varies based on whether parts are already available and whether the technician needs to flush, sanitize, and retest the unit after repairs. In most cases, repair is worth it when the membrane is still performing and the issue is limited to filters, UV/UF, or control components. Replacement becomes more likely when membrane scaling is severe, output quality remains poor after basic servicing, or there is repeated leakage risk from housing components.
Leaking from the membrane housing or electrical parts: risk of water damage and short circuits.
Repeated auto shut-off faults: float/solenoid issues can cause dry-running and early pump failure.
Salty taste with high RO TDS: indicates membrane performance problem, not just “dirty filters”.
Smell coming from stored tank: sanitization and correct filter/UV/UF checks are usually required.
Low inlet pressure symptoms: requires checking supply line, valves, and whether booster pump is healthy.
If you tell us the exact symptom (taste, smell, slow filling, shut-off, or leakage) and when it started, WPCI can diagnose faster and avoid unnecessary part changes. Next step: arrange a service visit and share your purifier model and any recent filter replacements, so the technician comes prepared.
Why Trust Us?
in Siliguri — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Most RO service pages talk about hard, salty water. Siliguri is different. The Siliguri Municipal Corporation draws its drinking water from the Teesta, through a canal and an intake well, and treats it at the Fulbari water treatment plant before sending it to the city's 47 wards. Water from a Himalayan river like the Teesta is usually low in dissolved salts. The challenge here is not salt; it is silt, turbidity and reliability.
The Fulbari intake has repeatedly been choked by silt, cutting the volume reaching the city well below demand. Flash floods on the Teesta, and repair work on its embankments and canal, have left taps dry for days, with the corporation sending water tankers and pouches. On at least one occasion, when the canal was shut for maintenance and water was drawn from the Mahananda instead, the mayor himself warned residents that the supplied water was not fit to drink. In the outer wards and the fast-growing areas beyond the corporation limits, many homes use tubewells. That is the real setting for RO service in Siliguri.
Often, a full RO is more than the water needs. If your home gets corporation supply and the TDS reads low, a UV + UF purifier, or an RO with its TDS controller opened well, keeps minerals in and wastes far less water. Running low-TDS water through RO and sending a large share down the drain makes little sense in a city that already struggles with supply shortfalls. Where RO earns its place is on tubewell water, which can carry iron and other dissolved minerals, and in homes that switch to tanker water during disruptions. We test before advising, every time. If you are about to buy a new purifier for a flat on corporation supply, ask us first; you may save on both the purchase price and years of wasted water by choosing a UV + UF model instead of a full RO.
| Water Source | Typical Issue | Purifier That Fits | Service Focus |
|---|---|---|---|
| SMC supply from Teesta via Fulbari | Low TDS, turbidity in floods and monsoon | UV + UF, or RO with controller open | Pre-filter, UF, UV lamp |
| Tubewell | Iron, rust colour, metallic taste | RO + UV, often with an iron pre-filter | Sediment filter, membrane |
| Tanker during disruption | Unknown source and quality | RO + UV | Check after use, sanitise tank |
Siliguri's long, heavy monsoon and humid air have an effect people do not expect: purifier electronics corrode. SMPS adaptors, PCB connectors and UV chokes in kitchens near stoves and sinks develop rust and loose contacts. Lightning-season voltage spikes add to the damage. When we service, we check connectors for corrosion, clean contacts, and look for water dripping onto electrical parts. Mount the purifier where it does not catch splashes, and use a surge protector. If the purifier stands in a closed cabinet, leave a little gap for air, because trapped damp warmth speeds up corrosion on the adaptor and board.
For purifiers on corporation water, service every six months, ideally once before the monsoon in May and again after it in October. On tubewell water with iron, every three to four months, and keep spare sediment cartridges at home. After any period of tanker supply or a flood-related disruption, have the pre-filter changed and the tank sanitised before you return to normal use.
We install purifiers of any brand, uninstall and refit them when you move, and offer annual maintenance plans for homes, offices, shops, schools and the many hotels and guest houses serving travellers heading to Darjeeling, Sikkim and the Dooars. We also service larger commercial RO systems.
Hakimpara, Pradhan Nagar, Ashrampara, Sevoke Road, Hill Cart Road, Khalpara, Mahananda Para, Subhaspally, Deshbandhu Para, Babupara, Haiderpara, Bhaktinagar, Shivmandir, Matigara, Champasari, Salugara, Dagapur, Jyoti Nagar, Burdwan Road and Panitanki More.
Water Purifier Care India is an independent multi-brand purifier service provider.
Call 8506096743 or book through this page for RO service in Siliguri.