
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Bhavnagar

Aquaguard RO Service Bhavnagar always stands whenever you call us for service. You must schedule a Aquaguard RO service to experience our satisfactory and low-cost service in Bhavnagar. Aquaguard RO Service Bhavnagar always care for your schedule with the vast service team.
Packages










If your Aquaguard RO is failing in Bhavnagar, you will usually notice it first in taste, flow, noise, or leakage. Maybe the water tastes salty, the storage tank is not filling properly, or the unit is running but giving low output. This guide explains the common symptoms, what they usually mean, and what a technician checks in the right order during an Aquaguard RO service visit by Water Purifier Care India (WPCI).
Salty or metallic taste: most often the RO membrane is exhausted, or the RO reject line is not working properly (sometimes due to a solenoid valve issue).
Water smells bad or looks yellowish: usually sediment build-up and carbon filter saturation, often worsened by monsoon turbidity in Bhavnagar.
Slow flow / slow filling: common causes are choked sediment pre-filter, low inlet pressure from municipal line, or a weak booster pump (if your model uses one).
Storage tank not filling: likely a float valve or inlet solenoid problem, low pressure, or blockage in inlet line and fittings.
Water leakage from the housing or under the unit: can be a loose housing O-ring, cracked drain line, leakage at fittings, or a membrane housing gasket issue.
Machine making abnormal noise and running continuously: often indicates water restriction (clogged filters), low pressure, booster pump trouble, or control/auto shut-off malfunction.
Quick symptom confirmation: check taste/smell, measure output flow and whether the storage tank is filling.
Check inlet water quality and pressure: confirm if you have low pressure from municipal supply or high sediment from borewell/overhead tank storage.
Inspect pre-filters and housings: look for clogging in the sediment pre-filter, and confirm carbon filter condition (pre-carbon and post-carbon stages if present).
Check RO membrane performance: run TDS and compare rejection behaviour; inspect RO membrane housing for leaks and scaling.
Check control parts that affect filling and shut-off: float valve operation, solenoid valve (SV) switching, and any booster pump/SMS power supply issues.
Confirm drain/reject line and internal connections: ensure reject flow is correct and there is no bypass that can cause salty water.
In Bhavnagar, hard water and frequent turbidity spikes (especially around monsoon) make filters clog faster. These intervals are typical guidance: service earlier if you notice taste change, slow flow, or tank filling problems.
Stage / part | Typical interval (depends on inlet water) |
|---|---|
Sediment pre-filter | Every 3-6 months |
Carbon filters (pre/post, if applicable) | Every 6-12 months |
RO membrane | Usually 2-3 years (faster with high TDS and poor pre-filtration) |
UV lamp (if your model has UV) | About 1 year of running time |
Overall RO service visit (inspection + cleaning) | About once or twice a year |
Covered in a normal service: internal cleaning, checking filter conditions, inspecting RO membrane housing area for scaling/leaks, testing flow and output, checking inlet/drain lines, and verifying float/SV operation.
Covered as needed: replacement of the choked sediment pre-filter or saturated carbon filter, and membrane replacement if TDS/rejection indicates membrane exhaustion.
Not covered by “service” if parts are damaged: major plumbing work beyond the RO unit, electrical work on house wiring, or repairing unrelated overhead tank/pipe issues.
Not guaranteed by service alone: if there is continuous low inlet pressure, the RO will underperform until pressure/line issues are fixed.
Not solved by filter change only: salty water caused by RO reject line/SV malfunction still needs those control checks.
In Bhavnagar, the cost mainly depends on what the diagnosis finds: whether it is just clogged filters, a control part like a float valve or solenoid valve, a booster pump/SMPS power issue, or RO membrane failure. The time taken depends on access to the unit, whether fittings or housings need resealing, and if multiple stages must be cleaned or replaced. Repair is usually worth it when the problem is limited to filters, a gasket/O-ring, or a single control component; it is less economical when the RO membrane is exhausted and multiple upstream parts are also heavily scaled. WPCI technicians typically explain the exact failed stage before doing any replacement so you know what you are paying for.
You see leakage from the membrane housing or housing seams (wrong O-ring fit can worsen leaks).
The unit runs continuously or auto shut-off is not working.
You get salty water soon after a filter change (control valve/reject line issue is likely).
Storage tank does not fill and you are not sure if it is float valve/SV/pressure related.
You have high inlet TDS or frequent turbidity and the RO performance is steadily dropping.
If you tell us the exact symptom you are facing (taste, flow, tank filling, noise, or leakage) and how long it has been happening in Bhavnagar, the next step is a proper on-site diagnosis. Book an Aquaguard RO service with Water Purifier Care India (WPCI) so the technician can check filters, membrane, and control parts in the correct order and fix the real cause, not just the effect.
Why Trust Us?
in Bhavnagar — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Bhavnagar families often notice that their water does not taste the same all year. Supply that comes from the Shetrunji dam, from Gaurishankar lake, and through the Mahi pipeline changes character as reservoirs fill and empty, and since 2019 the Shetrunji dam has also received Narmada water through the SAUNI project. Add borewells, which many societies and bungalows still run, and you get a city where the water entering an Aquaguard can vary from soft to sharply salty. Servicing an Aquaguard well here means reading the water each time, not just changing cartridges by the calendar.
Coastal Saurashtra has some of the most saline groundwater in western India. Official groundwater surveys of Bhavnagar district have recorded very high conductivity readings across much of the area, along with nitrate well above safe limits in some coastal villages and fluoride above the permissible level in a few inland spots. When an Aquaguard RO runs on such water, its membrane works close to its limit. Scale builds on the membrane surface, salt rejection slowly drops, and the water begins to taste brackish again. Catching that early is what regular service is for.
Taste Adjuster (MTDS): this dial controls how much water bypasses the RO membrane. On Bhavnagar borewell water we keep it low so salt and nitrate do not return to the drinking water. On BMC supply we can open it slightly for better taste.
Mineral Guard: replaces some calcium and magnesium after RO, which is especially helpful when the Taste Adjuster is kept low. Its cartridge has a defined life.
Active Copper: found on models such as the Aura and Ritz families; it should be replaced when exhausted rather than left in for years.
UV e-boiling: the UV stage that disinfects after RO. A lamp can still glow while its germ-killing output has fallen, so we test rather than assume.
Filter-life alerts: we reset these properly after a service so the warnings remain meaningful.
Aura, Delight, Enhance, Glory, Marvel, Ritz, Superb, Sure, Blaze and Designo, along with older Reviva, Geneus and Total purifiers that are still common in Bhavnagar homes.
| What You Notice | Likely Cause |
|---|---|
| Water slowly turning salty again | Membrane scaling from borewell water; Taste Adjuster set high |
| White deposits around the tap | Salts and hardness getting through |
| Service alert keeps showing | Counter not reset or filters genuinely due |
| Low flow from the tap | Choked pre-filter or worn pump |
| UV warning light | Lamp failure or loose connection |
| Rusty screws, corroded contacts | Salty sea air in coastal localities |
Bhavnagar gets most of its roughly 600 mm of annual rain between June and September. When the Shetrunji dam and Gaurishankar lake refill, the treated supply can taste different for a few weeks: fresh rainwater carries more silt and organic matter, while late-summer water may be more concentrated. Some families think their Aquaguard has developed a fault at this time. Often, a pre-filter change and a TDS check are all that is needed. Tell our technician when you first noticed the change; it helps us separate a water issue from a purifier issue.
Newer Aquaguard models carry more electronics than older ones: sensors, displays, a control board and the UV circuit, all fed through an adaptor. Voltage dips and sudden restoration after a trip can damage that adaptor first, and occasionally the board. Plugging the purifier into a socket with a basic surge protector is cheap insurance. If your Aquaguard went dark after a power cut, do not keep switching it on and off; that can make a small fault worse. Our technician will test the adaptor output before deciding what needs replacing.
Aquaguard on borewell water: every three months. On BMC supply: every six months. Copper and mineral cartridges: as per model, usually between six and twelve months. Book an extra check before May, when temperatures peak and families drink more water.
Hill Drive, Vidyanagar, Waghawadi Road, Ruvapari Road, Kaliyabid, Shastrinagar, Krishnanagar, Takhteshwar, Nilambaug, Sardarnagar, Bharatnagar, Subhashnagar, Chitra, Tarsamiya, Akwada, Sidsar, Ghogha Road, Kumbharwada, Panwadi and Atabhai Chowk.
Water Purifier Care India is an independent multi-brand service provider. We are not Eureka Forbes Ltd and not an official or authorised Aquaguard service centre. Aquaguard appears on this page only as a description of the machines we look after. Where a purifier is still within its manufacturer warranty, contacting the company is usually the sensible first step.
Call 8506096743 or book online through this page for Aquaguard RO service in Bhavnagar.