
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Vadodara

Aquaguard RO Service Vadodara always stands whenever you call us for service. You must schedule a Aquaguard RO service to experience our satisfactory and low-cost service in Vadodara. Aquaguard RO Service Vadodara always care for your schedule with the vast service team.
Packages










If your Aquaguard RO in Vadodara is giving trouble right now, you are probably noticing one of these: slow RO water flow, bad taste or smell, leakage under the unit, unusual noise, or the purifier not filling the storage tank. For most cases in Vadodara, the issue comes from clogged pre-filters, exhausted carbon filters, RO membrane scaling, low inlet pressure, or a failing pump/solenoid. This guide explains the symptoms first, then what a technician checks in the same order. That way you can call Water Purifier Care India (WPCI) with the right problem details.
Bad taste (often salty/metallic) or RO water not tasting clean: commonly RO membrane is exhausted or heavily scaled; technician checks TDS rejection and membrane condition.
Bad smell or black/grey particles in output: usually carbon stage is depleted or pre-filters are bypassing due to clogging; technician checks pre-carbon and post-carbon filter housing condition.
Slow RO filling or intermittent flow: often sediment pre-filter clogged, inlet pressure low (municipal or borewell), or booster pump issue; technician checks inlet pressure and filter pressure drop.
Storage tank not filling: usually float valve problem, solenoid valve (SV) not opening, or electrical issue to pump/controls; technician checks float, SV, and continuity.
Leakage from RO housing or under the unit: could be cracked housing O-rings, loose fittings, membrane housing leak, or drain line issue; technician inspects for wet spots stage by stage and checks seals.
Continuous running or frequent starts: often due to tank level/float misread, leak in tank line, or control board fault; technician verifies pressure switch/float signal and checks for leaks.
Quick observation: checks for leakage points, water spots, vibration/noise from pump, and whether RO starts and stops normally.
Inlet water reality check: measures inlet pressure (municipal vs borewell), checks if overhead tank supply is unstable, and notes turbidity changes common in monsoon.
TDS and rejection check: uses a TDS meter to compare input vs RO output; this helps decide if the RO membrane needs cleaning/replacement.
Filter stage inspection: opens filter housings to check sediment pre-filter and carbon filter condition; replaces clogged or exhausted filters.
RO module checks: inspects membrane housing for scaling and tests if RO output is still improving after filter changes.
Electrical and control checks: verifies booster pump, SMPS, solenoid valve (SV), float valve, and switches/relays for proper operation.
Check if water supply is steady: if municipal supply is off and on, the RO may fill slowly or fail to run normally.
Observe storage tank level: if the tank is not rising, it is often a float/SV issue; if it rises but RO output tastes bad, membrane/carbon is more likely.
Look for visible leaks: check around RO housing, fittings, and drain line; if water is pooling, stop using until it is inspected.
If you have a TDS meter: measure inlet and RO outlet TDS and note values; this helps the technician decide membrane vs filters faster.
Check for unusual sound: a weak clicking or grinding sound usually points to pump/SV/pressure issues, not only filters.
RO stage / part | Typical interval (varies with water quality and usage) |
|---|---|
Sediment pre-filter (pre-filter for mud and rust) | 3 to 6 months |
Pre-carbon and post-carbon filters (taste, odour, chlorine control) | 6 to 12 months |
RO membrane | About 2 to 3 years (can be earlier with high TDS and scaling) |
UV lamp / UV module (if your model has UV) | Around 1 year of running time |
Storage tank and float valve (checks/cleaning as needed) | Usually part of service; replace if float fails |
The final work depends on what the diagnosis shows: whether it is only a clogged sediment or carbon filter, or whether the RO membrane needs cleaning/replacement. The technician also considers if there is an inlet pressure problem (common with borewell/overhead tank fluctuations), or if electrical parts like booster pump, SMPS, solenoid valve (SV), or float valve are failing. If leakage is present, the cost also depends on which housing O-ring/fitting is leaking.
Most Aquaguard RO filter-related services can be completed in a shorter visit time. If the job involves membrane handling, pump/SV faults, or correcting a persistent leak, the technician needs extra time for testing after replacement. WPCI technicians typically finish only after checking RO output quality and confirming the unit fills and stops correctly.
If RO output quality is poor due to filters, repairing is almost always the practical choice. If the membrane is exhausted, replacement is still usually worth it compared to living with high TDS water. If the problem is electrical and repeated (for example, pump and control faults coming back), the technician will guide you after identifying the root cause rather than replacing parts blindly.
Do not delay if there is leakage, burning smell, or the unit is running continuously without filling the tank.
Call soon if taste/smell has changed suddenly, because carbon/membrane issues can progress quickly under hard water.
You can wait briefly (1-2 days) if the RO flow is slightly slow but still making acceptable water and there is no leak.
Avoid using the RO output for drinking if you notice salty taste, very high TDS, or black/grey particles.
If monsoon turbidity is high in your area, expect pre-filter clogging sooner and plan servicing accordingly.
If you tell WPCI what you are seeing (slow flow, salty taste, leakage, tank not filling, or noise) and whether you have borewell or municipal supply, the technician can start diagnosis at the right stage. The sensible next step is to schedule a service visit and stop guessing with random filter changes, because the right test (TDS, pressure, leak source) decides the repair.
Why Trust Us?
in Vadodara — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Vadodara has been spreading west for two decades. Gotri, Vasna-Bhayli Road, Bhayli, Sevasi and the land beyond have filled with tall residential schemes, while the old city around Mandvi and Raopura keeps its dense lanes and older homes. These two halves of the city often get their water from different places. The western belt is fed in part by the Khanpur project, which draws from the Narmada canal, and the Sindhrot project on the Mahisagar. Older central and eastern areas lean more on the Ajwa reservoir system. New schemes at the fringe frequently add borewells or tankers until municipal lines catch up.
Aquaguard purifiers are found throughout, and how we service them depends on which of these waters your home receives.
When a society switches between municipal supply and its own borewell, or takes tanker water during a shortage, the TDS reaching the purifier can jump sharply overnight. The Aquaguard does not know this. Its filter-life counter keeps counting days or litres, while its membrane is suddenly dealing with harder, saltier water. We see this pattern every summer in newer western societies and in the eastern areas where groundwater is known to be higher in TDS. The fix is simple: test whenever your building changes source, and set the taste adjuster accordingly.
Aura, Delight, Enhance, Glory, Marvel, Ritz, Superb, Sure, Blaze and Designo, plus older Reviva, Geneus and Total purifiers found in many Vadodara homes. Wall-mounted, countertop and under-sink formats are all covered.
| Complaint | What Usually Lies Behind It |
|---|---|
| Alert says "change filter" too early | Higher-TDS source clogging filters faster |
| Water tastes heavy after the society switched to borewell | Taste adjuster still set for municipal water |
| Purifier noisy and hot in May | Long run times and a blocked pre-filter |
| Fine grit in the sediment bowl | Construction dust entering open rooftop tanks |
| No power after a storm | Adaptor or board damage from a surge |
New towers keep rising around Bhayli, Sevasi and Vadsar, and the dust from all that building work settles into any rooftop tank without a tight lid. During the dry months, before the monsoon, we pull sediment filters out of Aquaguard units in these areas that are coated grey within weeks. Ask your society to keep tank covers sealed and to clean tanks at least twice a year. It is the cheapest way to make your filters last.
Plenty of Vadodara households own a Reviva or Geneus bought ten or more years ago. If the body is sound and compatible parts are available, a new membrane, filter set and pump can bring it back to good working order at a fraction of the cost of a new unit. If the cabinet is cracked, the board keeps failing, or parts are hard to find, a newer model with better water recovery may be the wiser spend. We lay out both options with rough numbers and let you decide; there is no commission riding on your choice.
For homes on steady VMC water: every six months. For homes that switch between municipal, borewell and tanker supply: every three to four months, and an extra test whenever the source changes. A pre-summer service around March and a post-monsoon tank clean round off the year.
Gotri, Vasna-Bhayli Road, Bhayli, Sevasi, Vadsar, Tandalja, Akota, Alkapuri, Old Padra Road, Race Course, Sayajigunj, Fatehgunj, Sama, Karelibaug, Harni, Manjalpur, Makarpura, Raopura, Mandvi and Waghodia Road.
Water Purifier Care India is an independent multi-brand service provider. We are not Eureka Forbes Ltd, nor an authorised Aquaguard service centre. The Aquaguard name is used only to describe the purifiers we service. If your purifier remains under the manufacturer's warranty, consider contacting Eureka Forbes first.
Call 8506096743 or book through this page for Aquaguard RO service in Vadodara.