
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Visakhapatnam

Livpure Service Center Visakhapatnam always stands whenever you call for service. You must schedule a Livpure Service to experience it's satisfactory and low-cost service in Visakhapatnam. Livpure RO Service Visakhapatnam always care for your schedule with the vast service team.
Packages










If your Livpure RO is not working properly in Visakhapatnam, you are probably noticing it day by day: slow water flow, bad taste or smell, repeated auto shut-off, leakage, or the storage tank not filling. Water Purifier Care India (WPCI) handles Livpure service in Visakhapatnam with a diagnosis-first approach, so the technician checks the likely causes in the right order instead of replacing parts blindly.
Salty or very bitter taste (especially when only drinking water is affected): usually the RO membrane is exhausted or bypassed, sometimes due to low-quality inlet or weak reject control.
Smell (stale, earthy, or chlorine-like) or cloudy water: often a choked sediment/pre-filter or carbon filter saturation; in some cases, tank hygiene is also needed.
Very slow RO output / frequent low-pressure behaviour: common causes are clogged sediment filter, low inlet pressure from borewell/municipal line, or a weak booster pump.
Auto shut-off not working / water keeps filling: technician checks the float valve, solenoid valve (SV), pressure switches, and wiring to the control board.
Storage tank not filling: typically float/valve issue, solenoid valve stuck, blocked flow restrictor, or RO not producing due to membrane/filter failure.
Leakage from near the RO housing or under the unit: technician checks O-rings, housing cracks, loose fittings, and whether drain line is blocked or overflowing.
Check inlet water condition and pressure: borewell vs municipal supply, presence of turbidity during monsoon, and whether inlet pressure is enough for RO.
Inspect pre-filters first: sediment (to stop sand/rust) and carbon (to reduce bad taste and chlorine effects). A choked pre-filter almost always reduces flow.
Test RO membrane performance: technician checks reject/production behaviour and TDS trend using a TDS meter (if available) to confirm membrane health.
Check storage and shut-off control: float valve, tank filling line, solenoid valve (SV), and pressure switch behaviour.
Inspect for leaks and air gaps: check RO housing fittings, tubing connections, and drain line for blockages.
Confirm UV/UF stage (if your model has it): for UV lamp, technician verifies power and lamp running status; for UF cartridge, checks cartridge condition and flow behaviour.
Note when the problem started: after monsoon water, after a power fluctuation, or after long non-use.
Check if other taps in the house have normal water pressure; RO will struggle if inlet pressure is low.
Look for visible leaks: near RO housing canisters, under the unit, and at drain line connections.
Check the storage tank level: is the tank empty, half, or full but RO drinking water output is wrong?
If you have a TDS meter at home, compare inlet TDS vs outlet TDS once (even approximate numbers help).
Confirm whether the purifier makes normal sound during RO start: no sound can point to power, SMPS, or pump control issues.
Visakhapatnam water can be hard and sometimes high in suspended particles during monsoon. That is why sediment pre-filter and carbon stages often become the first bottleneck, and why the RO membrane life depends heavily on how early pre-filters are changed. Typical intervals are below; exact needs vary with your inlet water quality and daily usage.
Stage (Livpure RO) | Typical interval (rough guide) |
|---|---|
Sediment pre-filter | 3-6 months |
Pre-carbon filter (taste/odor reduction) | 6-12 months |
Post-carbon filter (polishing, taste) | 6-12 months |
RO membrane | 2-3 years (often earlier in high inlet TDS/hard water) |
UV lamp (if present) | about 1 year of running time |
Cost depends on what the diagnosis confirms: a clogged pre-filter or water quality issue is simpler than fixing a booster pump, SMPS/control board, or a RO membrane. The technician also considers whether the problem is only one stage (for example, carbon saturation) or a chain reaction (low inlet pressure leading to membrane stress). Repair time is usually shorter when parts are accessible and the issue is mechanical (filters, tubing, SV/float). It takes longer if internal cleaning is needed, if multiple stages are failing together, or if the unit has leakage that must be traced carefully. In general, technicians repair when the membrane is still performing and only sensors/valves/pump need correction; replacement becomes more likely when output TDS rises consistently or the membrane shows sustained low rejection/low production.
Do not keep running the RO when flow is extremely slow; continuous strain can damage components.
Avoid opening the RO housing without proper cleaning and correct O-ring seating; leaks can start after incorrect reassembly.
Do not bypass the reject line or change flow restrictor settings by guesswork; it can ruin membrane life.
Do not ignore tank hygiene if you smell stale water; a dirty tank can cause bad taste even after filter changes.
If auto shut-off is failing or the unit is overflowing, do not keep using it until float/SV checks are done.
If you tell WPCI (Water Purifier Care India) what symptom you see and when it started, the technician can come prepared with the right checks and parts. Next step: switch off the RO for now if there is leakage or overflow risk, and book a Livpure service visit in Visakhapatnam for a proper diagnosis.
Why Trust Us?
in Visakhapatnam — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Visakhapatnam is not only a port and a beach city. Its western and southern stretches, around Gajuwaka, Malkapuram, Autonagar, Kurmannapalem and the Steel Plant area, form one of the largest industrial belts on India's east coast, with the refinery, the port, the steel plant and pharma units further out at Parawada. Families in these neighbourhoods often rely on a mix of GVMC supply, society borewells and tankers, especially in summer. That mix is where Livpure purifiers earn their keep, and where they wear out fastest.
A quick note for anyone who searched for a Livpure service center: we are an independent multi-brand provider that services Livpure purifiers. We are not Livpure's own centre. Details are at the end of this page.
GVMC's supply comes largely from the Yeleru reservoir through the Yeleru canal, topped up by reservoirs such as Thatipudi, Raiwada, Meghadri Gedda and Gambheeram Gedda. Treated municipal water is generally fine for an RO + UV purifier at modest TDS. Groundwater near the coast is more difficult; studies of the city's coastal aquifer have recorded seawater intrusion at most sampled points, especially before the monsoon. Tanker water can be anything. We test what is coming into your purifier before deciding what it needs.
We regularly service Glo, Glo Star, Glo Pro, Bolt, Bolt Star, Pep Pro, Pep Plus, Envy, Zinger and Touch purifiers. Livpure Smart subscription units can be serviced for hardware faults, though plan and billing questions are handled by Livpure.
| Livpure Stage | Function | What Wears It Out in Vizag | Typical Change |
|---|---|---|---|
| Sediment filter | Removes sand, rust, silt | Tanker silt, rust from old pipes | 3 to 6 months |
| Pre-carbon | Chlorine, odour, organics | Monsoon organic load, heavy chlorination | 6 to 12 months |
| RO membrane | Salts, hardness | Brackish bore water, scaling | 12 to 24 months |
| UF membrane | Cysts, very fine particles | Silt passing a tired pre-filter | 12 to 18 months |
| UV lamp | Disinfection | Running hours, power surges | About 12 months |
| Mineraliser, copper or zinc | Restores minerals and taste | Volume of water purified | About 12 months |
In the industrial belt, two things show up again and again. First, dust. Fine particles settle into open sumps and overhead tanks, and that grit lands in the sediment stage. Second, irregular supply. Buildings that depend on tankers in summer cannot always confirm where the water came from, and TDS can swing from load to load. In such homes, we recommend testing the tank water when a new supplier starts, keeping tank lids sealed, and not stretching filter changes past their due date. If your sediment filter is turning dark within weeks, that is a sign the building tank needs cleaning.
For homes on GVMC supply only, a full Livpure service every six months is usually right. For homes on bore or tanker water, every three to four months protects the membrane. Industrial-area homes with dusty tanks should also have the sediment stage checked midway between services.
Two times of the year deserve a reminder on your phone. The first is just before summer, usually around March, when GVMC supply begins to tighten and buildings start ordering tankers or running bores harder. The second is after the October and November rains, when the canal and reservoirs bring in more silt. A visit at each of these points catches most problems before the family notices a change in taste.
Gajuwaka, Malkapuram, Scindia, Autonagar, Sriharipuram, Kurmannapalem, Ukkunagaram, Aganampudi, Duvvada, Parawada, Sheela Nagar, NAD Junction, Marripalem, Kancharapalem, Gopalapatnam, Pendurthi, Akkayyapalem, Dwaraka Nagar and Madhurawada.
Although this page is titled for searches about a Livpure service center in Visakhapatnam, Water Purifier Care India is not that centre. We are an independent multi-brand purifier service provider and have no connection with Livpure Pvt Ltd. Livpure is a trademark of its owner, used here only to describe the purifiers we service. For warranty claims or subscription matters, please contact Livpure directly.
Call 8506096743 or book through this page for Livpure purifier service in Visakhapatnam.