
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Malegaon

Eureka Forbes RO Service Malegaon always stands whenever you call us for service. You must schedule a Eureka Forbes RO service to experience our satisfactory and low-cost service in Malegaon. Eureka Forbes RO Service Malegaon always care for your schedule with the vast service team.
Packages










If your Eureka Forbes RO in Malegaon is giving trouble right now, the fastest way to fix it is to match the symptom to the likely stage: sediment, carbon, RO membrane, UV/UF, or the inlet and storage parts. Water Purifier Care India (WPCI) handles Eureka Forbes RO service in Malegaon with a diagnosis-first approach, so you are not guessing what to replace. Below is what technicians check in order, based on what you can notice at home.
Bad taste or a salty/metallic taste: often the RO membrane is exhausted or bypassing, or post-carbon is worn out.
Bad smell (sometimes chlorine-like) even after running: usually carbon stage is depleted or water is stagnating in the storage tank.
Slow water flow / RO keeps running but tank does not fill: commonly sediment pre-filter is choked, inlet pressure is low, or the membrane is scaling.
No water output / repeated auto shut-off: could be a clogged filter, faulty solenoid valve (SV), float valve issue, or low inlet pressure.
Noise like buzzing, grinding, or frequent cycling: often booster pump problem, air in lines, blocked drain line, or electrical issue in SMPS/relay.
Leakage from the unit body or under the RO: check housing cracks, loose fittings, or membrane housing O-rings before anything else.
Confirm complaint and note the pattern: when it happens (after rain, after long non-use, only sometimes) and whether tank fills or not.
Check inlet conditions: municipal vs borewell supply, inlet pressure, and whether overhead tank water is muddy during monsoon.
Inspect the pre-filters and flow path: sediment pre-filter for clogging, and check carbon stage output for taste/smell control.
Test RO performance: inspect RO membrane for scaling/fouling signs, check rejection trend using a TDS meter reading (input vs treated).
Check system parts that control water flow: solenoid valve (SV), float valve, storage tank level, and drain line restrictions.
Final checks: run a full cycle, inspect for leaks, verify that UV lamp/UF cartridge is functioning if your model has it, then explain what was changed and what to monitor.
In Malegaon, hard water and monsoon turbidity can shorten filter life, especially if you use borewell water or store water in overhead tanks. These intervals are typical, not guaranteed, but they help you understand whether your RO is overdue for service.
RO stage / part | Typical interval | What you notice when it is overdue |
|---|---|---|
Sediment pre-filter | 3-6 months | Slow flow, frequent pressure drop, more dirt on lines |
Pre-carbon / carbon filter | 6-12 months | Bad smell or taste returns, water feels flat |
RO membrane | 2-3 years (often sooner in high TDS / hard water) | Salty taste, higher TDS in output, weak rejection |
UV lamp (if present) | about 1 year of running time | Concerns about water quality after long gaps (model-dependent) |
UF cartridge (if present) | about 1 year (varies by usage) | Reduced flow, filter fouling signs |
Covered during diagnosis: checking filters, flow, pressure, TDS difference, membrane symptoms, and key control parts like SV and float valve.
Covered during service: cleaning where applicable, replacing worn pre-filters/carbon as required, and checking leakage points in housings and fittings.
Covered when needed: RO membrane replacement if rejection is low or the membrane shows scaling that cannot be restored safely.
Not covered by default: major plumbing changes to borewell lines or overhead tank redesign.
Not covered as a routine: electrical wiring rewiring outside the RO unit if the issue is from external supply or improper earthing.
Not covered if the problem is from water source only: for example, extremely muddy inlet water for days may need source stabilization before the RO performs normally.
Service time depends on which stage is failing. A simple filter change with normal flow usually takes less time, while membrane replacement and leak troubleshooting take longer. Cost is mainly decided by the parts that the technician finds faulty (filters vs solenoid vs membrane), the extent of scaling/fouling, and whether multiple stages are affected at the same time. WPCI technicians in Malegaon generally start with diagnosis first, so you only pay for what is actually needed to restore performance.
Check if the problem is only during mornings or after rain: that points to inlet turbidity or low pressure.
Look for visible leakage: around membrane housing, under the unit, and at pipe joints.
Notice the cycle: does the machine start then stop, or does it run continuously without filling the tank?
Measure output TDS if you have a TDS meter: compare input vs RO output to understand membrane performance.
Check whether the RO tank is full and the float is moving freely (no stuck condition).
If you are seeing salty taste, slow filling, repeated shut-off, noise, or any leakage, do not keep running the RO for long hours. The sensible next step is to book a diagnosis visit for your Eureka Forbes RO in Malegaon, so the technician can check the filter stages, RO membrane performance, and the control parts in the right order. That is how WPCI helps you avoid unnecessary replacements and get stable output again.
Why Trust Us?
in Malegaon — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Walk into Malegaon homes and you will find Eureka Forbes purifiers from almost every era: a UV-only Aquaguard fixed above the sink fifteen years ago, a Dr. Aquaguard still sitting in a grandparent's kitchen, an AquaSure gravity unit bought for a rented flat, and a recent Aquaguard RO with a touch panel. All of them come from the same company, but they are very different machines with very different needs. This page is about looking after the whole Eureka Forbes family in Malegaon, old and new.
Many older Eureka Forbes purifiers in Malegaon were bought as UV-only machines at a time when the household drank mainly municipal water from the Girna and Chankapur dams. UV kills germs, but it does nothing about hardness or dissolved salts. Since then, a lot of families have added a borewell, and in drought years they buy tanker water too. That shift has quietly made a UV-only purifier a poor fit for some homes. If your water tastes heavy, leaves white rings in the kettle, or the TDS reading is high, the issue is not that the old Aquaguard has failed; it is that it was never designed for this water.
We will tell you honestly whether an older unit is still right for your home, whether a repair is worth doing, and whether spare parts are still realistically available for that model.
| Generation | Typical Technology | Best Suited To | Main Service Need |
|---|---|---|---|
| Older Aquaguard UV, Dr. Aquaguard | Carbon + UV | Low-TDS municipal water only | UV lamp, carbon cartridge, sleeve cleaning |
| Reviva, Geneus, Total | RO + UV, earlier designs | Mixed sources | Membrane, pump, ageing fittings |
| Current Aquaguard RO lines | RO + UV + mineral or copper stages | Hard or high-TDS water | Filters, membrane, cartridges, alerts |
| AquaSure RO / UV / gravity | Simpler RO or UV, or non-electric | Budget homes, rentals | Filter kits, membrane on RO models |
On older Eureka Forbes units, the usual complaints are a UV lamp that has quietly stopped working, brittle pipes and fittings that start to leak, and carbon cartridges that have gone well past their life. On newer RO models we see slow output from silt-clogged filters, salty taste when the taste adjuster is set too high for borewell water, and electronic faults after power fluctuations. AquaSure gravity owners usually call when the flow slows or the cartridge reaches the end of its life.
For a UV-only or gravity unit on clean municipal water, a check every six months and a yearly UV lamp change are typical. RO models on borewell or tanker water need attention every three to four months. Because water stored for days in Malegaon's heat breeds bacteria, the purifier's own storage tank should be cleaned at every visit, whatever the generation. A Eureka Forbes RO service in Malegaon just before summer is the visit we would recommend not skipping.
If a legacy unit needs a pump, a membrane and new fittings all at once, the repair can approach the cost of a new purifier. In that case we lay out both options with the numbers and let you decide. We do not sell purifiers on commission, so there is no reason for us to push one choice.
Mohan Nagar, Golden Nagar, Camp, Soyagaon, Collector Patta, Sangameshwar, Satana Naka, Agra Road, Juna Agra Road, Kusumba Road, Kidwai Road, Ramzanpura, Azad Nagar, Islampura, Kamalpura, Sardar Nagar, Mhalde, Dyane and nearby localities.
Water Purifier Care India is an independent multi-brand service provider. We are not Eureka Forbes Ltd or an authorised Eureka Forbes, Aquaguard or AquaSure service centre. These brand names are used only to describe the products we service. If your purifier is under manufacturer warranty, consider contacting Eureka Forbes directly.
Call 8506096743 or book online through this page for Eureka Forbes purifier service.