
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Nagpur

Eureka Forbes RO Service Nagpur always stands whenever you call us for service. You must schedule a Eureka Forbes RO service to experience our satisfactory and low-cost service in Nagpur. Eureka Forbes RO Service Nagpur always care for your schedule with the vast service team.
Packages










If your Eureka Forbes RO is acting up in Nagpur, you will usually notice it first in taste, smell, water flow, or leaks. Sometimes the RO starts, but the output is salty or cloudy; other times it fills slowly or stops altogether. When this happens, Water Purifier Care India (WPCI) usually finds the cause faster by checking the system in a fixed order: input water, pre-filters, membrane, and then the controls and storage tank.
Bad taste (often salty/metallic): commonly a tired RO membrane or high TDS feed water that has started bypassing
Bad smell or black/grey particles: usually pre-carbon or post-carbon filter exhaustion, or sediment filter not removing turbidity during monsoon
Slow water output / weak pressure: clogged sediment pre-filter, carbon choking, low inlet pressure from municipal supply, or a failing booster pump
RO keeps running but no proper water: often membrane fouling/scale, a solenoid valve (SV) issue, or a storage tank/float valve problem
Water leaking from the housing or fittings: loose clamps, worn O-rings, cracked housings, or leakage from drain/RO tubing connection
No output / RO not starting: power issue, SMPS/PCB fault, float switch stuck, or inlet solenoid not opening
Check input water quality: look at inlet TDS (if available), water clarity, and whether Nagpur borewell/municipal supply is giving high turbidity or hardness today.
Inspect pre-filtration: measure pressure drop across sediment and carbon stages; open housings only after confirming which cartridge is due and whether it is clogged or bypassed.
Test RO stage performance: check reject/flush behavior, and confirm whether the membrane is producing low TDS permeate or is scaled/fouled.
Check controls and safety: inspect float valve/switch (storage tank), solenoid valve (SV) operation, and confirm booster pump starts only when it should.
Look for flow and leak points: check tap fitting, RO tubing, drain line, and housing O-rings; confirm whether leakage is active during RO running.
Sanitize and clean where needed: service includes internal cleaning of flow path when carbon/membrane performance is affected by smell or microbial growth risk.
Observe when the issue started: after monsoon, after a power cut, after a long gap in usage, or after tank overflow. Timing helps narrow the cause.
Check the tank level and float: if water already filled and RO still runs, the float valve may be stuck.
Check inlet water availability: if municipal supply/borewell flow is low, RO will struggle even if filters are new.
Look for visible leaks: check under filter housings and around drain line during the first 5 minutes of RO start.
Notice taste change trend: if taste became bad suddenly, membrane or carbon stage is the first suspect; if it slowly got worse, scaling/fouling is likely.
Try a TDS reading (if you have a meter): if inlet TDS is high and output TDS is not dropping, the RO membrane stage needs testing.
In an RO system, the pre-filters protect the membrane. If the sediment filter is clogged, the flow drops and the membrane gets stressed. If carbon filters are exhausted, you can still get water that looks clear but tastes or smells off. The RO membrane is the main separation stage; when it scales (common in hard water areas around Nagpur) or ages, you may get higher TDS and a salty taste. After that, the post-carbon stage helps improve taste and odour before water goes into the storage tank.
Stage / part | What you may notice when it fails or gets clogged | Typical attention interval (rough estimate) | |
|---|---|---|---|
Sediment pre-filter | Slow flow, pressure drop, frequent choking | 3-6 months | |
Pre-carbon / carbon filter | Bad smell, taste issues, poor odour control | 6-12 months | |
RO membrane | Salty taste, higher output TDS, weak purification | 2-3 years (varies with inlet TDS and usage) | |
UV lamp (if present) | Must be checked for proper functioning when odour/taste issues persist | About 1 year of running time | |
Booster pump (if installed) | Low pressure symptoms, RO slow start or weak output | Replace/repair only when faults are confirmed | |
Float valve / storage tank | RO stops early or keeps running, inconsistent output | Check during service; replace only if faulty |
The cost mainly depends on what the technician finds during diagnosis: whether it is just filter cartridges, or a membrane replacement, or a component fault like booster pump, solenoid valve (SV), SMPS/PCB, or a leak repair. The second factor is the amount of cleaning required (heavy scaling and fouling need more work than routine servicing). The third factor is whether the RO is connected to a storage tank that needs float valve attention or whether there is a drain/installation issue causing pressure loss. Time also varies: a filter change after confirmation can be quick, while membrane replacement plus internal cleaning takes longer.
Worth repairing: bad taste due to carbon/micron sediment, slow filling due to clogged pre-filters, leakage from O-rings or tubing, or RO not starting due to a confirmed valve/pump issue.
Often replace membrane: output TDS not improving even after flushing, repeated taste complaints, and signs of scale build-up in the RO stage.
Be cautious about repeated faults: if multiple components fail in a short time, the inlet water quality and installation conditions may be the bigger problem.
If the RO is repeatedly leaking from housings or the controller is failing frequently, a complete system assessment is needed before deciding next steps.
For older units, WPCI technicians usually recommend a clear diagnosis first, then explain whether the remaining parts are healthy enough to justify further repair.
If your Eureka Forbes RO in Nagpur is tasting bad, filling slowly, or leaking, the sensible next step is to stop guessing and get a diagnosis based on the system stage (filters, membrane, and controls). Call Water Purifier Care India (WPCI) so your unit is checked in the right order and the correct parts are serviced, not just replaced blindly.
Why Trust Us?
in Nagpur — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Eureka Forbes has sold water purifiers in Nagpur for decades, and that long history shows up when we walk into homes. In a Dhantoli bungalow we might find a Dr. Aquaguard bought in the late 1990s still hanging above the sink. In a Wardha Road high-rise it is more likely an AquaSure from Aquaguard RO or a recent Aquaguard with a touch panel. All of these come from the same company, but they were built in very different eras, and servicing them well means knowing which era you are dealing with.
| Aspect | Older Eureka Forbes Units | Newer Aquaguard and AquaSure Models |
|---|---|---|
| Controls | Simple switches and indicator lamps | Touch panels, alerts and filter-life counters |
| Typical faults | Worn UV chokes, brittle pipes, leaking housings | Sensor errors, control-card damage after surges |
| Parts | Some spares now hard to find; compatible parts used | Readily available cartridges |
| Purification | Often UV only, no salt removal | RO, UV, UF with mineral retention |
| Service focus | Safety, leaks, UV strength | Membrane health, cartridge life, alert reset |
This is the most useful question for Nagpur owners of older Eureka Forbes UV units. When these were bought, the household probably drank only corporation water. Today, many families in extended areas supplement it with a borewell or a tanker. Nagpur's municipal water, drawn from the Kanhan and the Pench reservoir and treated at plants like Kanhan, Gorewada and Godhani, is generally low in dissolved salts and pairs well with UV. Groundwater is different: Central Ground Water Board data for Nagpur district notes scattered hardness and nitrate above desirable limits, and pockets of fluoride. A UV purifier kills germs but leaves all of that untouched. If your source has changed, our technician will tell you plainly whether an upgrade to RO makes sense, or whether your old unit is still doing its job.
In the dense lanes of Mahal, Itwari, Gandhibagh and Lakadganj, water often reaches homes through ageing lines and arrives at low pressure for limited hours. Families fill drums and sumps, and many have fitted small booster motors on the inlet. Two things follow. First, stored water picks up sediment and, if containers are not cleaned, bacteria, so the pre-filter and UV stage carry a heavier load. Second, RO units starved of pressure produce little water and waste more of it. We check incoming pressure on older-city visits, and where it is too low we explain the options honestly, from a correctly sized booster pump to choosing a UV purifier that needs far less pressure to work.
Some Nagpur homes, especially rented flats and small offices, use non-electric AquaSure gravity purifiers. These depend on a replaceable cartridge kit for germ removal and, like other gravity purifiers, do not reduce TDS. They suit corporation water, not borewell supply. We check the kit, clean the containers and advise on replacement timing.
Nagpur's summer is long and harsh, and purifiers work hardest from April to June. One service before that stretch and another after the monsoon covers most homes on city water. Older units benefit from an extra safety check each year, because ageing wiring and UV chokes are the parts most likely to fail. On groundwater, aim for a visit every three to four months.
Dhantoli, Congress Nagar, Dharampeth, Shivaji Nagar, Civil Lines, Sadar, Mohan Nagar, Ravi Nagar, Bharat Nagar, Friends Colony, Katol Road, Zingabai Takli, Jaripatka, Kamptee Road, Kalamna, Pardi, Wardha Road, Sonegaon, Khamla, Pratap Nagar, Trimurti Nagar and nearby areas.
Water Purifier Care India is an independent multi-brand service provider. We are not Eureka Forbes Ltd and not its authorised service centre. Eureka Forbes, Aquaguard and AquaSure are trademarks of their owner and are named here only to describe the purifiers we service. If your purifier is under manufacturer warranty, consider contacting Eureka Forbes directly.
Call 8506096743 or book online for Eureka Forbes RO service in Nagpur.