
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Pune

Eureka Forbes RO Service Pune always stands whenever you call us for service. You must schedule a Eureka Forbes RO service to experience our satisfactory and low-cost service in Pune. Eureka Forbes RO Service Pune always care for your schedule with the vast service team.
Packages










If your Eureka Forbes RO in Pune is giving trouble right now, you will usually notice it in daily use: bad taste, salty water, slow flow, frequent auto-stop, strange noise, or even leakage under the unit. When this happens, the cause is often not “one thing” but a chain of issues across filters, the RO membrane, and water supply pressure. For doorstep RO service in Pune, Water Purifier Care India (WPCI) focuses on diagnosing the symptom first, then fixing the exact stage that is failing.
Bad taste or salty/metallic taste: often means the RO membrane is exhausted or bypassing is happening due to damaged seals.
Bad smell (like carbon/chemical smell): usually points to depleted pre-carbon/post-carbon stages or stagnant water in the line/storage tank.
Slow water flow or no water: commonly a clogged sediment pre-filter, blocked feed line, low inlet pressure, or a failing booster pump.
Water keeps filling but storage tank is not filling properly: typically a solenoid valve (SV) issue, float/level switch problem, or wrong drain/pressure setup.
Leakage from under the housing: often from loose housing O-rings, cracked RO fittings, or membrane housing seepage.
Frequent auto shut-off / machine running continuously: usually linked to low pressure, inlet water quality (high turbidity/monsoon dust), faulty pressure switch/float, or electrical control issue.
A proper Eureka Forbes RO service is not just “changing filters.” A technician typically starts with the easiest, most likely checks: inlet water condition and pressure, then the pre-treatment stages, then the RO membrane and controls. This order matters because the same symptom (slow flow) can come from a clogged sediment filter or from low borewell/mains pressure.
Confirm the symptom: check tasting, smell, flow rate from the faucet, and whether the tank is filling normally.
Check inlet pressure and water availability (borewell vs municipal can change in monsoon): low pressure often causes the RO to under-produce.
Inspect and flush the pre-filter housing (sediment pre-filter): look for turbidity build-up and confirm differential pressure.
Check carbon stages (pre-carbon and post-carbon): verify whether they are exhausted and whether odour/taste has returned.
Test RO membrane performance: if TDS rejection is poor or permeate quality is bad, the membrane and seals are the likely culprits.
Check controls and path: solenoid valve (SV), float/level switch, pressure switch, drain line, and any booster pump wiring/noise.
Pune input water can get harder and more turbid during certain months, especially with overhead tank storage and monsoon disturbances. So timings below are “typical,” not guaranteed for every home. If your area has higher TDS or frequent turbidity, filters and membrane may need earlier attention.
RO stage | Typical interval (rough guide) | What you notice when it is overdue |
|---|---|---|
Sediment pre-filter | 3-6 months | Slow flow, frequent clogging, cloudy feed water inside housing |
Carbon filters (pre/post) | 6-12 months | Bad smell, poor taste improvement, faster membrane exhaustion |
RO membrane | 2-3 years (often sooner in high TDS) | Salty taste, higher TDS in output, tank filling but bad quality |
UV lamp (if your model has it) | About 1 year of running time | If UV is failing, you may not always see taste change, but sanitation performance drops |
Included: cleaning/flush of housings, inspection of pre-filter and carbon cartridges, checking connections and O-rings, and functional checks of RO production.
Included: membrane test based on output quality/TDS reading (where possible) and checking for bypass/leakage at the membrane housing.
Included: checks on solenoid valve (SV), float valve/level control, pressure switch, drain flow, and booster pump operation if present.
Not included unless you opt for parts: cartridge replacement, RO membrane replacement, UV lamp replacement, or electrical component repair.
Not included for DIY: opening electrical control boards beyond safe functional checks (a technician handles this as per model safety).
Not included as a “guaranteed fix” if the root cause is plumbing supply issues (for example, frequent mains/borewell pressure collapse).
Service cost usually depends on what stage is failing (sediment/carbon only vs membrane/seals vs solenoid/float/pump), the number of parts required, and whether the technician needs extra time for cleaning a heavily scaled system. Time taken depends on symptom severity: a simple pre-filter clog can be quick, while membrane plus control faults need more checks and testing. Repair is usually worth it when the issue is limited to filters/valves; if the membrane is exhausted along with multiple control problems, you may still repair, but the technician will confirm by testing output quality and pressure behavior before recommending the final work.
Check whether inlet water is stable: if your borewell/mains supply is fluctuating, RO will underperform until pressure stabilises.
Look for leaks around housings, fittings, and under the tank: wipe dry and observe where it reappears.
Confirm if the tank is filling and then stopping: if it never fills, stop using RO water and focus on valve/float and pressure checks.
Do not keep running the RO when it is producing only weak flow: it can worsen clogging and waste membrane life.
Note the exact symptom: taste (salty/odd smell), flow (fast/slow/no water), and timing (tank stops early, continuous running, or frequent auto-stop).
If you tell WPCI the exact symptom (taste/smell/flow/leak/noise) and when it started, the technician can reach the right diagnosis faster. The sensible next step is to stop using suspect output for drinking and book a doorstep RO service in Pune so the technician checks the filters, membrane, and control valves in the right order.
Why Trust Us?
in Pune — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Ask a Pune family which purifier they had first and a surprising number will say "the Aquaguard", often bought from a door-to-door salesman in the 1990s or 2000s. Eureka Forbes built much of its early reputation in Maharashtra, and in Pune today you find its products at every stage of life: a faithful UV unit humming in a Sadashiv Peth wada, a modern RO with copper and digital reminders in a Baner tower, an AquaSure gravity purifier in a grandparent's kitchen or a small shop. Our Eureka Forbes RO service in Pune is set up to look after all of them.
Under the Aquaguard name we service RO and RO + UV purifiers such as the Marvel, Glory, Ritz, Superb, Aura, Delight, Enhance, Sure, Designo and Blaze, as well as the older Reviva, Geneus, Total, Crystal and Classic UV purifiers. We also handle the AquaSure from Aquaguard line in its RO, UV and non-electric versions, and legacy Dr. Aquaguard machines where parts can still be found.
The Peths, Deccan, Shivajinagar, Camp and Model Colony have drawn on Pune Municipal Corporation supply from the Khadakwasla dams for generations. After treatment, that water is soft and light in dissolved solids. A UV-only Aquaguard suits it well: germs are inactivated, and nothing useful is stripped out. This is why so many old units keep going in these neighbourhoods, provided their lamps are replaced on time and their sleeves kept clean.
The city's growth belts tell a different story. Plenty of societies in Wakad, Wagholi, Undri, Hinjewadi and Kharadi lean on tankers or borewells, at least in dry months. That water is harder and its quality changes from load to load, and Pune groundwater studies have documented sewage seeping into deeper aquifers after the rains. A UV unit cannot reduce dissolved salts, so RO is needed here. Current Eureka Forbes models answer this with RO plus a Taste Adjuster (MTDS), Active Copper and Mineral Guard cartridges, but each extra cartridge is another part with a fixed life that must be tracked.
Many older buildings in central Pune still have galvanised iron plumbing and overhead tanks that are awkward to reach. Even with clean municipal supply, rust flakes and settled grime from these tanks find their way to the purifier. A cheap inline pre-filter fitted ahead of the unit catches most of it and protects the costlier stages. When a renovation is planned, swapping old iron lines for CPVC is worth every rupee. On ageing UV units, we also inspect the quartz sleeve closely, because a filmed sleeve can block most of the lamp's output while the lamp itself still looks bright.
| Purifier | Complaint | What Is Usually Wrong |
|---|---|---|
| Legacy UV Aquaguard | Lamp indicator dark | Lamp, choke or a coated sleeve |
| Legacy UV Aquaguard | Water tastes heavy after a move | New flat runs on tanker water |
| Recent Aquaguard RO | Reminder light will not go off | Cartridge overdue or counter not cleared |
| Recent Aquaguard RO | Water tastes thin | MTDS shut on soft dam supply |
| AquaSure gravity | Nothing comes out | Cartridge capacity used up |
| Any of them | Completely dead | Surge-damaged board or adaptor |
If your old UV purifier is sound and you are on PMC water, a service and fresh lamp may give it several more good years. If you have moved to a tanker-fed society, or nobody makes spares for your model any more, a new RO purifier is the sensible route, and we will say so with the readings in hand rather than talk you into it.
How often: RO units on municipal water every six months with a yearly UV lamp; on tanker or borewell supply every three to four months, with a membrane typically lasting around twelve months; old UV units once a year for lamp and sleeve. A check after the monsoon helps all of them.
Sadashiv Peth, Shukrawar Peth, Budhwar Peth, Deccan, Shivajinagar, Model Colony, Camp, Koregaon Park, Kalyani Nagar, Yerawada, Viman Nagar, Kharadi, Wagholi, Hadapsar, Kothrud, Bavdhan, Baner, Aundh, Pashan, Wakad, Undri and Kondhwa.
What you get from us: identity-checked technicians who have worked on every Eureka Forbes generation, a fixed quote before the job, a written warranty on repairs and parts, and in most areas a visit the same day or the next.
Water Purifier Care India is an independent outfit that looks after purifiers of many makes. We are not part of Eureka Forbes Ltd, nor an authorised service point for it. Eureka Forbes, Aquaguard and AquaSure belong to their owner and are named here only so you know which purifiers we handle. If your unit is still within its manufacturer warranty, Eureka Forbes should be your first call.
Call 8506096743 or book online through this page for Eureka Forbes RO service in Pune.