
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Thane

Eureka Forbes RO Service Thane always stands whenever you call us for service. You must schedule a Eureka Forbes RO service to experience our satisfactory and low-cost service in Thane. Eureka Forbes RO Service Thane always care for your schedule with the vast service team.
Packages










If your Eureka Forbes RO purifier in Thane is giving bad taste, slow drinking water, foul smell, continuous noise, or leakage, the issue is usually not “mystery problem” but a specific stage failing. For most homes, the first suspects are the pre-filters, carbon filters, RO membrane, and the storage tank/float system. In many cases, Water Purifier Care India (WPCI) technicians can pinpoint it quickly by checking the symptoms in the right order.
Bad taste or salty taste: often the RO membrane is exhausted or bypassed due to low rejection
Bad smell (sometimes like chlorine/chemical or stale water): usually dirty carbon post-filter or contaminated tank
Slow flow / weak output: typically choked sediment pre-filter, clogged carbon, or low inlet pressure from municipal supply/borewell
Water not filling the storage tank: float valve issue, solenoid valve (SV) not opening, or low inlet pressure during fill
Leakage from bottom or around fittings: loose housing connection, cracked tube/joint, or membrane housing seepage
Machine runs continuously or keeps cycling: pressure switch/flow restrictor fault, solenoid timing issue, or water level/float not sensing correctly
Verify inlet water condition: check if Thane supply is very turbid (monsoon) and measure inlet pressure/TDS reading if available
Inspect pre-filter and sediment stage: confirm if the sediment (and any pre-stage cartridge) is clogged and causing pressure drop
Check carbon filters (pre-carbon/post-carbon): confirm smell/taste control is still working and whether filter housings are properly seated
Test RO performance: check membrane output/rejection signs and inspect membrane housing for signs of scaling or seepage
Check tank and valves: test float valve operation, solenoid valve (SV) function, and tubing routes that control fill and shutoff
Look for leaks and electrical issues: inspect joints, check for water near SMPS/connection area, and confirm pump operation/noise
In Thane, hard water, high input TDS, and seasonal turbidity are common reasons RO systems get stressed faster. Pre-filters catch sand and silt from overhead tanks and borewells; carbon filters handle odour and chlorine/changing taste; the RO membrane does the actual TDS rejection. UV lamp (if your model has it) is a separate stage and needs periodical checks to ensure it is functioning properly.
RO stage (typical) | What it fixes | Typical interval (rough guide) |
|---|---|---|
Sediment / pre-filter | Sand, rust particles, turbidity | Every 3-6 months |
Pre-carbon / post-carbon | Smell, taste changes, chlorine impact | Every 6-12 months |
RO membrane | High TDS rejection, salty taste issue | Usually 2-3 years (depends on input TDS/usage) |
UV lamp (if present) | Bacterial control stage | About 1 year of running time |
Storage tank + float/SV | Proper filling and shutoff | Service/replace only when fault is found |
Covered: cleaning and inspection of filter housings, checking flow paths, and replacing failed cartridges/filters as per diagnosis
Covered: leak tracing from tubing/joints/housing, tightening or replacing small fittings, and checking drain/saddle connections
Covered: checking RO feed restrictions, pump operation, and electrical safety around SMPS/connection areas
Covered: verifying tank fill control (float valve/SV) so the unit stops at the right level
Not covered as “service”: replacing the whole RO system when only one stage is faulty (technicians repair first, replace only if needed)
Not covered as “service”: resolving problems caused by wrong installation on day one (like incorrect inlet/drain connections) without doing the necessary rework
Cost usually depends on which stage failed: a clogged sediment pre-filter needs only filter servicing, while RO membrane replacement is a bigger decision. Leakage repairs depend on whether the issue is a simple tube/joint or a housing seepage. If the float valve, solenoid valve (SV), or pressure switch is faulty, the technician will replace the part after testing. The time taken depends on diagnosis first, then parts availability, and whether the tank/drain line also needs rework. In most cases, repair is worth it when the pump and membrane are still performing and only one or two stages are failing. If the membrane is exhausted and multiple filters are also heavily choked, the technician will explain the combined fix in one go so you do not keep facing repeated breakdowns. This is the way WPCI typically handles Eureka Forbes RO issues in Thane—diagnose first, then decide the smallest necessary fix.
If you see leakage from the bottom: do not keep running the unit; water near electrical parts is risky
If taste is salty/metallic and flow is also weak: membrane may be exhausted, and repeated filter-only changes won’t solve it
If the tank does not fill after power/level changes: float valve/SV testing is required
If the unit makes unusual noise or keeps cycling: pressure switch/flow restrictor faults need inspection
If you have recent monsoon turbidity and your RO output became inconsistent: pre-filters may be severely choked and require proper cleaning/replacement
Next step: tell the technician your exact symptom (taste, smell, flow, leakage, or tank filling problem) and share how long it has been happening. If possible, note whether the issue started after monsoon, a power fluctuation, or after the last filter change. Then schedule an on-site diagnosis so the right stage is corrected the first time.
Why Trust Us?
in Thane — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Thane has grown in layers. The older town around Naupada, Kopri and Charai filled up decades ago; Vartak Nagar, Panchpakhadi and Wagle Estate followed; and the high-rise towers of Ghodbunder Road are the newest layer. Eureka Forbes purifiers have grown with the city, so we find every generation here, from a Dr. Aquaguard UV unit installed when the flat was first bought to an AquaSure RO bought online last year. This page covers servicing all of them.
Thane's water is not like that of inland cities on hard groundwater. The municipal corporation delivers soft, low-TDS surface water drawn from the Bhatsa river scheme, STEM, MIDC and the Mumbai corporation's quota, all rain-fed Sahyadri sources. For a home that receives only this water, a well-maintained Eureka Forbes UV purifier does the essential job of killing germs without wasting water or stripping minerals. We see many families who replaced a working UV unit with RO they did not need. Where tankers form part of the supply, though, RO becomes a sensible upgrade, because tanker water can come from anywhere.
| Check | Legacy Units (Dr. Aquaguard, early RO) | Current Aquaguard and AquaSure |
|---|---|---|
| UV system | Lamp, choke and wiring checked for heat damage | Lamp hours and UV error alerts |
| Filters | Cartridge replacement with compatible parts | Original-spec cartridges, alert reset |
| Body and pipes | Brittle tubing and yellowed housings replaced | Push-fit joints and solenoid checked |
| Electronics | Basic switch and indicator | Touch panel and PCB checked for humidity damage |
| Water output | Germ protection only, no TDS change on UV units | TDS, mineral and copper stages verified |
Coastal humidity accelerates ageing. On legacy units we often find rust on the mounting screws and UV choke casing, cracked plastic tubing and corroded terminals. On newer models the same moisture reaches touch panels and circuit boards. Part of every Eureka Forbes service in Thane is an electrical safety check: earthing, insulation, socket condition and signs of overheating. An old purifier that tingles to the touch or smells of burning should be switched off at once.
When a legacy Eureka Forbes purifier finally needs more repair than it is worth, think about your water before choosing the next one. If your building runs steadily on corporation supply, a UV or UV + UF model, or an RO with strong mineral retention, will serve you well and waste little. If your society brings in tankers every summer, pick an RO with a TDS or taste adjuster so you can switch settings as the source changes. Measure the TDS of your tap water in both May and September; the two readings tell you more about what to buy than any brochure. We are happy to take those readings during a service visit.
Non-electric AquaSure purifiers are common in rented rooms and small offices across Kalwa, Kopri and the station area. They suit soft corporation water, though they do nothing to reduce salts. Their cartridge kit has a fixed capacity, and we check how much life remains based on daily use. In the monsoon, rinse the pre-filter more often, because supply may arrive muddy after heavy rain.
UV purifiers on corporation water: a yearly lamp change and a filter check every six months. RO purifiers on corporation water: two services a year. Homes regularly using tankers: every three to four months. Units over ten years old: at least one full safety inspection every year.
Naupada, Kopri, Charai, Chendani, Panchpakhadi, Vartak Nagar, Shastri Nagar, Wagle Estate, Kisan Nagar, Srinagar, Lokmanya Nagar, Yashodhan Nagar, Majiwada, Manpada, Kolshet, Hiranandani Meadows, Kasarvadavali, Gaimukh, Kalwa, Vitawa and nearby areas.
Water Purifier Care India is an independent multi-brand service provider. We are not Eureka Forbes Ltd and not its authorised service centre. Eureka Forbes, Aquaguard and AquaSure are trademarks of their owner and are named only to describe the purifiers we service. If your purifier is under manufacturer warranty, consider contacting Eureka Forbes directly.
Call 8506096743 or book online for Eureka Forbes RO service in Thane.