
Repair
- Complete RO system inspection and diagnosis
- Repair of pump, SMPS, membrane and filters
Doorstep RO Repair, Installation & AMC in Pimpri-Chinchwad

Eureka Forbes RO Service Pimpri-Chinchwad always stands whenever you call us for service. You must schedule a Eureka Forbes RO service to experience our satisfactory and low-cost service in Pimpri-Chinchwad. Eureka Forbes RO Service Pimpri-Chinchwad always care for your schedule with the vast service team.
Packages










If your Eureka Forbes RO in Pimpri-Chinchwad (Pimpri, Chinchwad, and nearby areas) is giving bad taste, bad smell, slow water flow, leakage, or the unit keeps running, it is usually not a “mystery problem”. Water Purifier Care India (WPCI) handles Eureka Forbes RO service, repair, and installation-related issues based on what you are seeing at home. A technician will check the system stage-by-stage, because each symptom points to a specific part like pre-filters, carbon filters, RO membrane, UV, or the water inlet side.
Bad taste or salty water (especially after some time): commonly the RO membrane is exhausted or the brine (reject) line is not working correctly.
Bad smell (mild to strong, often worse after storage): usually pre-carbon/post-carbon fouling, bacterial growth due to stagnant water, or UV/UF not functioning.
Slow filling / low RO output: commonly blocked sediment pre-filter, low inlet pressure from borewell/municipal supply, or a weak booster pump.
Water leakage (under the RO housing, near fittings, or from the drain): commonly loose tubing, perished O-rings, cracked housing, leaking RO membrane housing, or a faulty solenoid valve (SV).
Machine noise or continuous running: commonly a stuck float valve, faulty SV, low water level in the storage tank, or inlet flow issue.
No water / RO not starting: commonly no inlet water, failed SV, pressure switch issue, or membrane housing blockage.
Check the user-visible issue first: taste/smell, flow rate, and whether the unit is cycling normally.
Verify inlet water conditions: inlet pressure, whether water is coming continuously, and if the supply is very turbid during monsoon.
Inspect and test key stages: sediment pre-filter (choking/scaling), pre-carbon and post-carbon (odour/taste control), RO membrane performance, and UV lamp or UF cartridge (if your model uses it).
Check storage tank and controls: float valve operation and whether the system stops when tank level is reached.
Inspect fittings and possible leak points: drain line, reject line, storage tank connections, and RO housing O-rings.
Run functional checks and confirm performance with TDS readings (input and output) to decide whether parts need cleaning or replacement.
These are typical intervals seen in Pimpri-Chinchwad, where hard water and monsoon turbidity can shorten filter life. Exact timing depends on your inlet TDS, how many times the RO is used, and whether the unit is left unused for long periods.
RO stage (Eureka Forbes RO) | Typical interval (rough) |
|---|---|
Sediment pre-filter | 3-6 months |
Pre-carbon / post-carbon filters | 6-12 months |
RO membrane | 2-3 years (often earlier with very high TDS/hardness) |
UV lamp (if applicable) | around 1 year of running time |
UF cartridge (if applicable) | as per water quality and performance, often 6-18 months |
General internal cleaning / hygiene check | every service cycle, especially if smell returns |
Stop using and call service if there is leakage near electrical parts, water pooling under the unit, or repeated tripping of power.
If the output TDS suddenly becomes high (your water tastes salty and TDS meter shows output close to inlet), do not keep flushing for long hours; the membrane may need replacement or reject flow correction.
If smell returns within days after filter change, the issue is usually hygiene, carbon bypass, UV/UF failure, or stale water in the tank.
Do basic checks only: confirm water supply is coming, tank has water, and the RO is not running dry.
Avoid DIY for membrane removal, electrical connections (SMPS/UV/lamps), and solenoid valve (SV) replacement—these need correct fittings and pressure testing.
The cost mainly depends on which stage is failing. A blocked sediment filter or carbon filter is a smaller job than an RO membrane replacement. If the problem is from low inlet pressure (common with borewell or overhead-tank supply), sometimes the service is about correcting the water feed setup, not only filter changes. Repairs involving the solenoid valve (SV), booster pump, storage tank controls (float valve), UV lamp, or membrane housing typically take more time because parts must be matched and the system must be tested after fixing.
Most filter and internal cleaning services are usually quicker. Membrane replacement and control-part repairs take longer because the technician has to check connections, run the unit through cycles, and confirm output quality with TDS readings.
If only one stage is failing (for example, carbon causing smell or sediment causing slow flow), repair is usually the sensible option. If multiple failures show up together—like repeated leaks, poor reject handling, and membrane exhaustion—then the technician may recommend a more complete service plan to restore stable performance. WPCI typically explains what failed and why, so you can decide with a clear picture rather than guessing.
Next step: note the symptom you are seeing (taste, smell, flow, leakage, or cycling) and call for an RO service visit in Pimpri-Chinchwad. A proper stage-wise check is the fastest way to stop wasting water and avoid repeated failures.
Why Trust Us?
in Pimpri-Chinchwad — Reliable, Fast & Professional
Technician visits your location for service
Guaranteed service visit in 48 hours for any request
Trained technicians for high quality service and repairs
Only high quality spare parts used for repairs
Watch
FAQ
Find answers to common questions about our services
Long before Wakad and Punawale filled with towers, Pimpri-Chinchwad was a planned industrial town. The New Town Development Authority laid out the sectors of Nigdi Pradhikaran and Akurdi, and families who worked at the big automobile and engineering plants settled in Pimpri, Chinchwad, Sant Tukaram Nagar and Yamuna Nagar. Many of those households bought an Eureka Forbes purifier decades ago and have stayed loyal to the brand, replacing one Aquaguard with the next. Walk into such a home today and you may find a wall-mounted UV Aquaguard from years back in the kitchen and a new AquaSure RO in a son's flat across town. We service the whole family of Eureka Forbes purifiers, old and new.
| Aspect | Legacy Eureka Forbes Units | Current Aquaguard and AquaSure |
|---|---|---|
| Purification | Mostly UV; some early RO | RO + UV + UF, mineral and copper options |
| Suits PCMC municipal water? | UV units generally yes | Yes, with taste adjusted |
| Suits tanker or bore water? | UV-only units no | RO models yes |
| Typical faults | Dim UV lamp, failed choke, brittle plastic, hard tubing | Control card, sensors, solenoid valve, joint leaks |
| Spare parts | Scarce for the oldest models | Widely available |
| Our recommendation | Keep if body is sound and supply is PCMC water | Service to suit your source |
In the older planned sectors, most homes receive PCMC water from the Pavana dam, treated at the Nigdi plant close by. This water is moderate in dissolved salts, and the main risk is microbial, especially because supply has been on alternate days since 2019 and water is stored in tanks. A UV purifier that is properly maintained handles that risk well, and it keeps natural minerals that an RO would remove. We do not recommend replacing a working UV unit just because it is old. What we do recommend is an honest check: a fresh UV lamp each year, a clean pre-filter, and a test if the household's source ever changes.
If your home now relies partly on tanker water, which is common in parts of Moshi, Chikhali, Charholi and the western belt, a UV-only unit is not enough, because tanker water is usually harder borewell water. Signs to watch: white deposits on vessels, a heavier taste, scale on the kettle. At that point an Aquaguard or AquaSure RO is the right step. We will show you the readings and let you decide.
There is also a middle path for some homes. If tanker water is used only for a few weeks each summer, a family may keep the old UV unit for municipal water and fill drinking bottles from a neighbour's RO, or use the gravity AquaSure as a short-term backup, rather than buy new. If tankers are a year-round reality, though, that compromise stops making sense. Older housing in Pradhikaran with independent bungalows sometimes has its own borewell for gardening and washing; make sure that line never feeds the kitchen purifier by mistake, as we occasionally find during visits.
On older units, we mainly replace dimmed UV lamps that still glow but no longer disinfect, burnt chokes, yellowed housings that crack, and stiff tubing that leaks at joints. On newer Aquaguard and AquaSure models, typical calls involve control cards damaged in thunderstorms, solenoid valves that stick, service alerts that will not clear, and membranes overloaded by tanker water in summer. Monsoon silt affects both: pre-filters clog during the heaviest weeks on the Pavana.
UV units on PCMC water: lamp yearly, filters every four to six months. RO models on PCMC supply: every six months. Any purifier on tanker or bore water: every three to four months. After the first heavy monsoon spell, a quick pre-filter check helps every type.
Nigdi, Pradhikaran, Akurdi, Yamuna Nagar, Sambhaji Nagar, Sant Tukaram Nagar, Pimpri, Pimpri Camp, Chinchwad, Chinchwad Station, Bijlinagar, Kalbhor Nagar, Thergaon, Pimple Gurav, Sangvi, Bhosari, Chikhali, Moshi, Charholi and Wakad.
Water Purifier Care India is an independent multi-brand service provider. We are not Eureka Forbes Ltd and not an authorised service centre for Aquaguard, AquaSure or any other Eureka Forbes brand; these names are used only to describe the purifiers we service. If your purifier is under manufacturer warranty, you may want to contact Eureka Forbes first.
Call 8506096743 or book online for Eureka Forbes RO service in Pimpri-Chinchwad.